Month: June 2025

ABB 500BIO01 1MRB150005R0001 and 1MRB200060/E are digital input/output modules in Advant controller 500 series, which belong to the key components of ABB traditional distributed control system (DCS). These modules are designed for signal acquisition and equipment control of industrial process automation, and constitute the basic I/O layer of Advant OCS(Open Control System).

Product line positioning
Series ownership: Advant Controller 500 series.
Product generation: the second generation of distributed I/O (products in the late 1990s)
Technical architecture: modular design based on field bus.
Life cycle status: EOL, but still supported by spare parts.

The AO810/AO810V2 Analog Output Module has 8 unipolar analog output channels. To supervise the communication to the D/A-converters the serial data is read back and verified. The opencircuit diagnostic is received during the readback. The module performs self-diagnostic cyclically. The module diagnostics includes process power supply supervision, which is reported when supply voltage to output circuitry is to low. The error is reported as a channel error. The channel diagnostic includes fault detection of the channel (only reported on active channels). The error is reported if the output current is less than the output set value and the output set value is greater than 1 mA.
Features and benefits
8 channels of 0…20 mA, 4…20 mA outputs
OSP sets outputs to predetermined state upon error detection
Analog Output is to be short circuit secured to ZP or +24 V

ABB SC560
ABB SPASI23
ABB SPBRC400
ABB CI546 3BSE012545R1
ABB 3HAB8101-18/09A
ABB 3BHL000986P7001
ABB HBFFAEAGNBA1BAA11G
ABB TU810
ABB 5SHX1960L0006 3BHB016120R0002 3BHE019719R0101 GVC736BE101
ABB NBIO-31 3BSE011337R1
ABB SPAJ140
ABB A30-30-10RT
ABB T3N225
ABB 7625013-S
ABB XUD194 3BHE018137R0001 AC800PEC
ABB 129740-002  134177-001
ABB GFD233A103 3BH022294R0103
ABB AO810
ABB MVR 0.44-10KA

UNITROL® 6000 X-power the solution for large power applications

UnitrOL® 6000 X-power is designed for large power generation units and brings a new benchmark in flexibility, reliability and connectivity.

With single/double channel control configuration (additional backup controller on request) and   a wide selection of thyristor bridge modules, UNITROL® 6000 X-power can be configured to meet all field data and availability requirements.

Selected applications 

 • Nuclear power plant, field current Ifn >10,000 A

 • Underground hydro power plant, Ifn 4,500 A, with redundant air-to-water heat exchanger system

 • Gas turbine power plant, MEGATROL package with Ifn 6,000 A and static frequency converter 15 MW for turbine starting

 • Coal-fired power plant, Ifn 3,500 A, power part in IP54 container, detached AVR cabinet with >150 m distance apart 

 • Hydro power plant, Ifn 4,000 A, two DC field circuit breakers, one for DC backup excitation.

Basic range numerical relay for distribution networks

REJ601 is a dedicated feeder protection relay intended for the protection of utility and industrial power systems in primary and secondary distribution networks. The relay provides an optimized composition of protection and monitoring functionality in one unit, with the best performance and usability in its class.

REJ601 is a dedicated feeder protection relay intended for the protection of utility and industrial power systems in primary and secondary distribution networks. The relay provides an optimized composition of protection and monitoring functionality in one unit, with the best performance and usability in its class.

Besides the conventional current transformer interface based variant, the relay also supports a variant based on Rogowski current sensors’ analog interface. This helps to obtain a compact medium voltage switchgear equipment size reduc­tion with improved performance and standardization.

Scope

Main protection for overhead lines and cable feeders in solidly earthed, resistance-earthed or isolated networks

Inrush current stabilization function for distribution transformers

Product benefits

Compact, flexible and simple to handle

Speedy commissioning through selective test function for protection functions, binary signals and communication features

Easily configurable binary inputs and outputs

Extensive self-supervision of the relay hardware and software

Enhanced safety with usage of sensors variant / detachable terminals with CT shorting facility

Press fit mounting arrangement facilitates easy and fast installation

Less number of variants, easy to stock

Product features

Overcurrent, earth-fault, phase-discontinuity, negative-phase sequence and thermal-overload protections, inrush current detection, reclosing and measurement

Preconfigured functionality facilitates easy and fast commissioning

Universal power supply 24-265 V AC/DC

Configurable binary inputs/outputs using local HMI or communication interface

Site selectable CT selection (1 or 5A), Boolean logic and timers

Supports Modbus RTU and IEC 60870-5-103 protocols

Easy upload of fault recorded information like events, fault records and disturbance records from front USB port

ABB Relion® 605 series is a protective relay product family specially designed for distribution network, which represents the technical benchmark in the field of low and medium voltage power system protection. Based on ABB’s decades of experience in the field of power protection, this series integrates the latest digital signal processing technology and network communication capabilities, and provides a complete solution for substation automation.

Series core value
Modular design: allows users to select functional combinations according to specific application requirements.
Compact structure: Optimized space utilization, especially suitable for renovation projects.
Intuitive operation: simplified man-machine interface lowers the threshold of use
Network integration: supporting modern substation communication standards
Product line composition
Series 605 contains several special protection relay models, each with its own characteristics:

1. REF601
   Feeder protection and control relay
   Integrate protection, monitoring and control functions into one.
   Including circuit breaker control function.
   Support automatic reclosing (up to 4 times)
2. REJ601
   Overcurrent protection relay
   Focus on overcurrent and ground fault protection
   Circuit breaker control function is not included.
   Three configurations are available (B/C/D)
3. REM601
   Motor protection relay
   Optimized for motor protection
   Including start-up monitoring and thermal model.
   Support a variety of motor starting modes.
4. RET615
   Transformer differential protection relay
   Adopt advanced differential protection algorithm.
   Including inrush current suppression function.
   Support multi-winding transformer protection
   Technical architecture
5. Hardware platform
   Processor system: 32-bit DSP+ARM dual-core architecture.
   Sampling system: 16-bit ADC, sampling at 64 points per cycle.
   Power supply design: wide range input (24-250V AC/DC)
   Mechanical structure: 1/2 frame width, front wiring design.

SM560-S (1SAP280000R0001) is a high-performance CPU module in ABB AC500 programmable logic controller (PLC) series, equipped with the firmware version of SM560-S-FD-4. This CPU is designed for medium-sized automation applications, providing powerful processing power and flexible expansion options.

Core product identification
Product model: SM560-S
Order number: 1SAP280000R0001
Firmware version: SM560-S-FD-4
Product series: AC500 PLC
Manufacturer: ABB
technical specifications

1. Processing performance
   Processor type: high-performance industrial-grade processor
   Execution speed: typically 0.1ms/1000 instructions (depending on firmware version and program complexity)
   Memory capacity:
   Working memory: the typical configuration is several MB (the specific capacity needs to be confirmed)
   Retention memory: used to store key data.

General Information

Product ID:769137

ABB Type Designation:-

Catalog Description:Detector 13CO2 10% (Uras26)

Additional Information

ABB Type Designation:-

Consumption Information:recommended part

Country or Territory of Origin:GermanyUnited States

Customs Tariff Number:90279000

Frame Size:Spare_Parts

Gross Volume:0.22 dm³

Gross Weight:0.25 kg

Invoice Description:Detector 13CO2 10% (Uras26)

Made To Order:No

Minimum Order Quantity:1 piece

Order Multiple:1 piece

Package Level 1 Depth / Length:11 cm

Package Level 1 Gross Weight:0.25 kg