Archives

FOXBORO P0973LN  Chassis-based managed switch with independent power supply

SSA S180 Chassis Managed Switch: P0973LN

General Information

Model: P0973LN

Type: Chassis-based managed switch with independent power supply (P0973LQ)

Network Features

Access Ports: 48 × 1000Base-T (Gigabit Ethernet)

Uplink Ports: 4 × 10G SFP (configurable as 1 Gb uplink ports, or a combination of Gigabit and 100 Mb ports)

Controller Module (P0973LN as Industrial Controller)

Hardware Platform

CPU: Intel® Core™ i7

Memory: 16 GB DDR4

Storage: 1 TB SSD

Operating System: Windows 10 IoT Enterprise

Interfaces & Protocols

Ethernet support

Protocols: Modbus TCP/IP, EtherCAT, PROFINET

Compatibility with traditional standards: Modbus, DeviceNet

Electrical Parameters

Operating Voltage: 220 V

Operating Frequency: 50 kHz

I/O Channels: 8 digital inputs / 8 digital outputs

Key Features

High performance and scalability

Industrial-grade reliability

Combines network switch and controller functions in one module

FOXBORO FBM242 CHANNEL ISOLATED 16 OUTPUT SWITCH P0923LK 0A P0923LH 0C

Foxboro PH10 1P2A-4 2B1245 pH Sensor Approx 15 Ft

FOXBORO INFRARED GAS & LIQUID ANALYZER W/ CARRYING CASE 063-5688

CFS10 FOXBORO MASS FLOWTUBE, 3/4″ FNPT, 200-180

Foxboro C0159PX-B ECEP-13050A-SF9415 Control Module

foxboro transmitter model IGP20-A22A21F(637)

Foxboro DM900HT-0D / FBM 24 / I/A Series Input Module

INVENSYS FOXBORO P0916JY FBM242 Switch Module External PLC COMP TERM ASSY

NEW FOXBORO 0039463 AIR SWITCH 39463

Foxboro Co. P0400YE I/A Series Input/Output Module Rev. 0S FBM 4 0-20mA

FOXBORO MT-14UJIS-014-W NSFS

FOXBORO FBM 201 Channel isolated 8 input 0.20mA RH91 4SQ HUGE REDUCTION

FOXBORO CM400YK REV. 0F NSNP

FOXBORO’s P0926PA is an input/output module commonly used in industrial automation control systems.

It belongs to the FPS400 series and is compatible with I/A series control systems. Its core is used for signal interaction and power supply between field devices and control systems, etc

Core function

Signal processing and conversion: It can handle 4-20mA current signals and -10 to + 10V voltage signals.

It can convert these analog signals transmitted by industrial field sensors into data recognizable by the control system, and also output control signals to drive the operation of field actuators.

Balance power supply and control

It can not only supply power to other modules in the FOXBORO I/A series control system, but also achieve precise position and speed control of devices such as motors and servo drivers, and is adaptable to various motion control scenarios.

Self-diagnosis of faults

It is equipped with built-in fault detection and self-diagnosis functions, which can monitor its own operating status in real time.

If any abnormality occurs, it can be promptly fed back, facilitating staff to troubleshoot problems and ensuring the stable operation of the industrial control system.

Key technical parameters

Specific values of parameters

There are 4 channels

The input current range is 4-20mA

Input voltage range: -10 to + 10V

Input impedance 2kΩ

Output voltage: 24V DC

Output current 4A

Rated power: 96W

Operating temperature: -40°C to 70°C

Dimensions: 70mm×150mm×135mm

Weight: 0.5kg

Typical application scenarios

This module, with its stable performance, is widely applied in multiple industries such as petroleum and natural gas, chemical engineering, power, water treatment, and pulp and paper.

It can be specifically used for the collection and monitoring of process parameters such as pressure, temperature, flow rate and liquid level, for instance,

in the temperature data collection of reaction vessels on chemical production lines, liquid level control in water treatment systems, and can also be adapted to the operation status monitoring scenarios of power equipment such as generators and transformers.

FOXBORO (Foxboro) is a well-known brand in the field of industrial automation, specializing in process control instruments, control systems and related components, which are widely used in industries such as petroleum, chemical engineering and power.

Model Analysis

Both models are prefixed with “L0130A” and belong to the same series of products.

The suffixes “D” and “E-0H” are specific configuration distinction codes, which may correspond to different ranges, output signals, installation methods or functional versions (there is no publicly available universal definition, which needs to be confirmed in combination with the product manual).

Core purpose

This type of number is mostly process control components, commonly found in the measurement or control loops of parameters such as pressure, temperature, and flow rate, and it is a basic hardware unit in industrial automation systems.

In process control environments,  where accurate temperature measurements are the backbone of safe and efficient operations,  engineers frequently contend with sensor failures from overexposure to corrosive media or thermal shocks,

resulting in skewed data that triggers unnecessary shutdowns or quality deviations.

The FOXBORO L0130AD and L0130AE-0H, both duplex thermocouples, rise to the occasion as durable,  redundant sensing solutions that deliver dual-signal redundancy for critical loops,  ensuring high-reliability I/O without single-point vulnerabilities.

These assemblies prove vital in situations like  retrofitting boiler controls in power plants or expanding monitoring in pharmaceutical reactors,  where a single thermocouple burnout could halt production and inflate costs.

Visualize a fertilizer plant handling  ammonia synthesis under high-pressure steam—the FOXBORO L0130AD provides isolated duplex type K elements to track  temperature gradients precisely,  mitigating risks from process upsets while supporting modular integration into existing DCS frameworks.

By aligning with  objectives such as signal stability and fault-tolerant design,  they enable teams to sustain continuous uptime amid aggressive chemistries,  cutting the incidence of false readings that plague standard single-element probes.

For those immersed in industrial  automation, these thermocouples stand out during upgrades to redundant architectures,  where their mineral-insulated construction wards off sheath breaches, preserving I/O signal integrity in harsh,  high-temperature zones.

The L0130AE-0H variant extends this with specialized head mounting for easier field access,  ideal for confined spaces requiring quick calibration swaps.

Together,  the FOXBORO L0130AD and L0130AE-0H fortify process control by embedding resilience into temperature sensing,  allowing engineers to prioritize throughput optimization over sensor babysitting in demanding automation landscapes.

FOXBORO 0399085B 0303440C+0303458A Combination Control Module

Order Number:0399085B 0303440C+0303458A

Brand:FOXBORO

Model:0399085B 0303440C+0303458A

Operating Voltage:220V

Weight:3.5 lbs

Dimensions:8 x 6 x 4 inches

Designed for seamless integration into existing industrial control systems, the FOXBORO 0399085B 0303440C+0303458A combination module provides a robust solution for process automation needs.

With its advanced technology, this module ensures stable and accurate control of various processes.

This combination module is crafted from high-quality materials to withstand harsh industrial environments, ensuring long-lasting performance and minimal downtime.

ts compact design allows for easy installation and maintenance, reducing the complexity of system upgrades.

The FOXBORO 0399085B 0303440C+0303458A combination module supports a wide range of operating voltages and frequencies, making it suitable for diverse applications across different industries.

Its UL and CE certifications guarantee compliance with international safety standards.

By combining multiple functionalities into a single module, the FOXBORO 0399085B 0303440C+0303458A ensures streamlined operations and improved efficiency in industrial control systems.

This module is ideal for manufacturers looking to optimize their production processes and energy management.

With a user-friendly interface and detailed documentation, the FOXBORO 0399085B 0303440C+0303458A combination module simplifies setup and operation, allowing engineers to quickly configure and deploy the module in their systems.

Its reliability and versatility make it a valuable asset for any industrial control project.

FOXBORO SY-0399095E (SY-0303451D+SY-0303460E) Process control board

The FOXBORO SY-0399095E (SY-0303451D+SY-0303460E) process control board is a type of process control board used in industrial automation and control systems.

This control board is mainly used to achieve signal transmission and processing among various devices and sensors in industrial automation systems.

The SY-0399095E process control board has multiple functions, including signal acquisition, signal processing, logic control, etc.

It can collect various signals from industrial sites through various sensors, such as temperature, pressure, flow rate, etc., and convert these signals into digital or analog signals for processing and analysis.

Meanwhile, it can also control external devices or actuators based on preset logic and control rules, achieving monitoring and control of the automated production process.

SY-0399095E

The SY-0399095E process control board has the following features:

High reliability: High-quality hardware and software design are adopted to ensure stable operation for a long time.

High performance: It has efficient data processing capabilities and can meet various complex control requirements.

Easy to expand: Different modules can be added or removed as needed to achieve functional expansion and customization.

Good compatibility: It can be seamlessly integrated with other Foxboro control systems to achieve unified management and control of the system.

Easy to maintain: It offers a wealth of diagnostic and maintenance tools to facilitate users’ troubleshooting and maintenance.

When using the SY-0399095E process control board, correct configuration and debugging should be carried out according to the actual application requirements to ensure its normal operation.

At the same time, attention should also be paid to the product’s usage environment and safety protection measures to prevent overloads, short circuits and other faults from causing damage to the module and the entire control system.

In conclusion, the FOXBORO SY-0399095E (SY-0303451D+SY-0303460E) process control board is a high-quality and high-performance process control board, suitable for automation control systems in various industrial fields.

It can effectively improve production efficiency, reduce maintenance costs, and ensure production safety

SY-0399095E

FOXBORO 0399071D 0303440C+0303443B Input/Output (I/O) Module

The FOXBORO 0399071D 0303440C+0303443B is an analog signal input module designed specifically for industrial process control systems within the Foxboro I/A Series platform.

This module is widely used in sectors such as petrochemical, power generation, metallurgy, and manufacturing where accurate analog signal conversion and monitoring are critical.

It accepts approach probe signals as input and converts these to standardized 4-20 mA analog signals as well as digital signals that can be processed by controllers and distributed control systems (DCS).

The module is engineered to provide high precision measurement and reliable analog input processing, supporting critical tasks like level, flow, temperature, and pressure monitoring in industrial automation setups.

FOXBORO 0399071D 0303440C+0303443B

Physically, the FOXBORO 0399071D 0303440C+0303443B module features a robust construction that withstands harsh industrial environments.

It incorporates alarm and protection functions to guard against abnormal signal conditions, ensuring stable system operation and early warning for maintenance personnel.

The module’s design emphasizes integration ease within the Foxboro I/A Series control architecture, facilitating precise and seamless data acquisition from field devices.

Its application in safety and control systems highlights its role in delivering continuous and dependable analog data critical for process optimization and operational safety.

The module supports advanced analog-to-digital conversion with 16-bit resolution, which translates to excellent measurement accuracy and signal fidelity.

It accommodates approach probe inputs commonly used in level detection systems, making it versatile across various process monitoring applications.

The assembly comprising the 0399071D 0303440C+0303443B combination enables direct interface with both analog sensors and digital process control equipment, bridging the gap between field measurement and control feedback loops.

Its built-in diagnostic capabilities provide status monitoring, enabling quick identification and troubleshooting of input anomalies, thereby reducing downtime and enhancing operational reliability.

FOXBORO RH924UQ Redundant Controller module

FOXBORO RH924UQ: This redundant controller module is one of the core components of the FOXBORO I/A Series distributed control system (DCS).

It has a powerful process control capability, supports dual-machine hot standby operation, power supply voltage: 24V DC, protection grade:

IP20, operating temperature: 0°C to 50°C.

It is widely applied in key industrial fields such as power, chemical engineering, and metallurgy to ensure high system availability and control continuity.

Main features and advantages

Let’s first talk about its redundancy capability.

This is no simple backup. FOXBORO RH924UQ supports true Hot Standby, with extremely short primary and backup switching times, usually completed within milliseconds, ensuring the continuity of the control process.

This is crucial for applications that do not allow interruption, such as steam turbine control and reactor temperature regulation.

The module integrates status monitoring and self-diagnosis functions internally, which can report the hardware health status in real time, helping Maintenance personnel identify potential problems in advance and achieve Predictive Maintenance.

Let’s take a look at its integration.

As part of the I/A Series system, FOXBORO RH924UQ is seamlessly integrated with FOXBORO’s FBM (Fieldbus Module) series I/O modules, FHM (Highway Module) communication modules, etc.

It achieves high-speed data exchange through FOXBORO’s proprietary Universal Control Network(UCN) and Input/Output Network(I/O Network), with stable communication rate and low latency.

This highly integrated design greatly simplifies the system configuration and debugging work.

Moreover, it supports online replacement (plug and unplug while powered on), allowing module replacement or upgrade to be completed without shutting down the system, which greatly enhances the maintainability of the system

FOXBORO E69F-TI2-S current pneumatic converter

Product Description

FOXBORO E69F-TI2-S is a current-pneumatic converter or positioner that receives standard DC input signals and converts them into proportional pneumatic output signals to achieve precise control of industrial equipment and systems.

It may have a high degree of reliability and stability, and be able to adapt to various working environments and application scenarios.

In addition, the converter or positioner may also feature a modular design, making installation and maintenance more convenient and efficient

Product parameters

E69F-TI2-S

The specific parameters of FOXBORO E69F-TI2-S include:

Current: 0-60A, which indicates the maximum current range it can handle

Output frequency: Standard HzHz, indicating the frequency range of its output signal

Voltage: Rated, which is the voltage level required for the normal operation of the equipment

Power: Rated, indicating the power required for its normal operation

Please note that the parameters listed here may only be part of them.

The actual product parameters may also include other contents, such as input signal range, output signal range, accuracy, response time, etc.

To obtain complete and accurate product parameters, it is recommended to refer to FOXBORO’s official documentation or contact its technical support department.

Product specifications

Regarding the specific specifications of FOXBORO E69F-TI2-S, such as physical dimensions, interface types, weight, etc., exact data cannot be provided at present.

These specification information are crucial for the installation, operation and maintenance of the equipment.

OVERVIEW

The FBM219 Discrete I/O Module has 24 discrete

input channels and 8 discrete output channels.

Associated termination assemblies (TAs) support

discrete input or output signals at voltages of under

30 V dc, 120 V ac/125 V dc, or 240 V ac.

Depending on the type of I/O signal required, the TAs

contain current limiting devices, fuses, relays, or relay

outputs with internal or external power source and

fusing.

TAs are available which support the functionality of

the 100 Series main FBM07A/B, FBM08. FBM20.

and FBM24A/B/C (16 input main FBMs), when these

main FBMs are used with expansion FBM14.

FBM15. FBM16. FBM27 or FBM42 (8 input/8/output

expansion FBMs).

FEATURES

Key features of the FBM219 are:

 Twenty-Four (24) discrete inputs

 Eight (8) discrete outputs

 Supports discrete input/output signals at

voltages of:

• 15 to 60 V dc

• 120Vac/125 V dc

• 240V ac

 Each input/output is group isolated

 Compact, rugged design suitable for enclosure in

Class G3 (harsh) environments

 Executes the Discrete I/O or Ladder Logic

program, with the following configurable options:

Input Filter Time, Fail Safe Configuration, Fail

Safe Fall-Back, and Sustained or Momentary

FBM219

Outputs

 Various Termination Assemblies (TAs) that contain

high voltage attenuation and optical isolation for

inputs

COMPACT DESIGN

The module has a compact design, with a rugged

extruded aluminum exterior for physical protection of

the circuits. Enclosures specially designed for

mounting the FBMs provide various levels of

environmental protection, up to harsh environments,

per ISA Standard S71.04.

VISUAL INDICATORS

Light-emitting diodes (LEDs) incorporated into the

front of the module provide visual indication of the

Fieldbus Module operational status, as well as the

discrete states of the individual input and output

points.

EASY REMOVAL/REPLACEMENT

The module can be removed/replaced without

removing field device termination cabling, power, or

communication cabling.

FIELDBUS COMMUNICATION

A Fieldbus Communications Module or a Control

Processor interfaces to the redundant 2 Mbps

module Fieldbus used by the FBMs. The FBM219

accepts communication from either path (A or B) of

the 2 Mbps Fieldbus- should one path fail or be

switched at the system level, the module continues

communication over the active path.

MODULAR BASEPLATE MOUNTING

The module mounts on a DIN rail mounted baseplate,

which accommodates up to four or up to eight

Fieldbus Modules. The Modular Baseplate is either

DIN rail mounted or rack mounted, and includes

signal connectors for redundant Module Fieldbus,

redundant independent dc power, and termination

cables.

SECURITY

Field power for contacts or solid state switches is

current limited.

TERMINATION ASSEMBLIES

Field I/O signals connect to the FBM subsystem via

DIN rail mounted TAs. The TAs used with the

FBM219 are described in See “TERMINATION

ASSEMBLIES AND CABLES” on page 7.

FBM219