Product Information
Description:
D201925
DISCONTINUED BY MANUFACTURER
MOSET D201925 EMBEDDED INDUSTRIAL CONTROLLER
ACN CS
INPUT: 18-36 VDC / 10 AMP
FACTORY WARRANTY MAY NOT APPLY. RADWELL 2-YEAR WARRANTY INCLUDED
MOSET D201925 DISCONTINUED BY MANUFACTURER
Description
Use the 3500 System rack to mount all 3500 monitor modules and power supplies. The rack allows you to place 3500 modules near one another, enabling them to easily communicate, and to mount power supplies necessary to distribute power to each module. 3500 racks are available in two sizes: Full-size rack. 19-inch EIA rack with 14 available module slots. Mini-rack. 12-inch rack with seven available module slots. You can order 3500 racks in three formats: Panel mount. This rack format mounts to rectangular cut outs in panels, and secures to the panel using clamps supplied with the rack. Wiring connections and I/O modules are accessible from the rear of the rack.
Rack mount. This rack format mounts the 3500 Rack on 19 inch EIA rails. Wiring connections and I/O modules are accessible from the rear of the rack. Bulkhead mount. This rack format mounts the rack against a wall or panel when it is not possible to access the rear of the rack.
Wiring connections and I/O modules are accessible from the front of the rack. The 3500/05 Mini-Rack is not available in this format. The power supplies and rack interface module must occupy the far-left rack positions. The remaining 14 rack positions (seven rack positions for the mini-rack) are available for any combination of modules.
Description
Use the 3500 System rack to mount all 3500 monitor modules and power supplies. The rack allows you to place 3500 modules near one another, enabling them to easily communicate, and to mount power supplies necessary to distribute power to each module. 3500 racks are available in two sizes: Full-size rack. 19-inch EIA rack with 14 available module slots. Mini-rack. 12-inch rack with seven available module slots. You can order 3500 racks in three formats: Panel mount. This rack format mounts to rectangular cut outs in panels, and secures to the panel using clamps supplied with the rack. Wiring connections and I/O modules are accessible from the rear of the rack. Rack mount. This rack format mounts the 3500 Rack on 19 inch EIA rails. Wiring connections and I/O modules are accessible from the rear of the rack. Bulkhead mount. This rack format mounts the rack against a wall or panel when it is not possible to access the rear of the rack. Wiring connections and I/O modules are accessible from the front of the rack. The 3500/05 Mini-Rack is not available in this format. The power supplies and rack interface module must occupy the far-left rack positions. The remaining 14 rack positions (seven rack positions for the mini-rack) are available for any combination of modules.
Description
The 3500 System rack design holds all 3500 monitor modules and rack power supplies. It allows the various 3500 modules to communicate with one another and the power supplies to distribute power to each module as required. C US 3500 Racks are available in two sizes:
1. Full-size Rack – 19-inch EIA rack with 14 available module slots
2. Mini-Rack – 12-inch rack with 7 available module slots 3500 racks are available in three formats: 1. Panel mount – This rack format mounts to rectangular cut-outs in panels, and secures to the panel using clamps supplied with the rack. Wiring connections and I/O modules are accessible from the rear of the rack. 2. Rack mount – This rack format mounts the 3500 rack on 19-inch EIA rails. Wiring connections and I/O modules are accessible from the rear of the rack.
3. Bulkhead mount – This rack format mounts the rack against a wall or panel when it is not possible to access the rear of the rack. Wiring connections and I/O modules are accessible from the front of the rack. The 3500/05 Mini-Rack is not available in this format. The Power Supplies and Rack Interface Module must occupy the far left rack positions. The remaining 14 rack positions (7 rack positions for the Mini-Rack) are available for any combination of modules. If you plan to install internal barriers in the 3500 rack, consult our document part number 141495-01, Specifications and Ordering Information for 3500 Internal Barriers.
The 4-Channel Relay Module is a full-height module that provides four relay outputs. Any number of 4-Channel Relay Modules can be placed in any of the slots to the right of the Rack Interface Module. Each output of the 4-Channel Relay Module can be independently programmed to perform needed voting logic. Each relay utilized on the 4-Channel Relay Module includes “Alarm Drive Logic”. The Alarm Drive Logic is programmed using AND and OR logic, and can utilize alarming inputs (alerts and dangers) from any monitor channel or any combination of monitor channels in the rack. This Alarm Drive Logic programming uses the 3500 Rack Configuration Software to meet the specific needs of the application. Note: Triple Modular Redundant (TMR) applications require the use of the 3500/34 TMR Relay Module. Consult Bently Nevada Specification and Ordering Information part number 141534-01 for details.
Specifications
Inputs Power
Consumption: 6 watts typical. OK LED:
TX/RX LED: CH ALARM
LED: Relays
Type: Environmental
Sealing Arc
Suppressor Contact Life
Operation
Illuminated when module is
functioning properly.
Transmit and Receive. Flashes
to indicate proper
communications between this
module and other modules
within the rack.
Illuminated when the Relay
Channel is in an alarm state.
Two single-pole, double-throw
(SPDT) relays connected in a
double-pole, double-throw
(DPDT) configuration.
The 3500/65 monitor provides 16 channels of temperature monitoring and accepts both resistance temperature detector (RTD) and isolated tip thermocouple (TC) temperature inputs. The monitor conditions these inputs and compares them against user-programmable alarm setpoints. The monitor is programmed using the 3500 Rack Configuration Software. You can configure the 16-Channel Temperature Monitor to accept isolated tip thermocouples, 3-wire RTD, 4-wire RTD, or a combination of TC and RTD inputs. In Triple Modular Redundant (TMR) configurations, you must install temperature monitors in groups of 3 adjacent monitors. In this configuration the monitor uses 2 types of voting to ensure accurate operation and to avoid single point failures.
Product overview
Eaton XV-102-BE-35TQR-10 is a high-performance touch-screen human-machine interface (HMI) product introduced by Eaton Company, which belongs to XV-102 series. This product is specially designed for industrial automation environment, integrates rich communication interfaces and powerful processing capabilities, and is suitable for various industrial control scenarios.
Core specification parameters
physical characteristics
Dimensions: 170mm (length) ×130mm (width) ×39mm (height)
Weight: about 0.54kg
Shell material: engineering plastic
Protection level:
Front panel: IP65
Back panel: IP20
NEMA grade: 4X
Display characteristics
Screen type: 5.7-inch TFT color display
Resolution: 640×480 pixels (VGA)
Color depth: 65,536 colors (16 bits)
Brightness: 250 CD/m
Contrast: 300:1
Backlight: LED, which supports software to adjust brightness.
Touch technology: resistive touch screen (glass+thin film sensor)
hardware configuration
Processor and memory
CPU: 32-bit RISC processor, clocked at 400MHz.
Memory configuration:
64MB DRAM (operating system, program and data storage)
32KB NVRAM (data retention)
128MB NAND flash memory (data backup)
Extended storage: support SD card (in line with SDA 1.00 specification)
Power supply characteristics
Working voltage: 24V DC(-20%/+25%)
Voltage range: 18.0-31.2V DC
Maximum power: 10W
Power protection: with reverse polarity protection function.
communication interface
Standard interface configuration
Ethernet interface:
10/100Mbps adaptation
Support MODBUS TCP/IP and EtherNet/IP protocols.
Serial communication:
1×RS232(9-pin SUB-D interface)
1×RS485(9-pin SUB-D interface)
USB interface:
1×USB 2.0 Host(1.5-12Mbps)
1×USB 2.0 Device
Fieldbus:
PROFIBUS/MPI interface (maximum 1.5Mbps)
Special instructions
All communication interfaces are not designed with electrical isolation.
Ethernet connection is limited to internal network use.
software environment
operating system
Windows CE 5.0 (license included)
Support software platform
Programming and visualization software:
XSOFT-CODESYS-2/3
GALILEO
EPAM
PLC programming software:
XSOFT-CODESYS-2/3
acclimatization
working conditions
Temperature range: 0 C to 50 C.
Humidity range: 10-95% (non-condensing)
Air pressure range: 795-1080hPa
Anti-vibration performance: conforming to IEC/EN 60068-2-6.
Impact resistance: conforming to IEC/EN 60068-2-27.
Certification and compliance
Safety certification:
UL 60950-01
CSA-C22.2 No. 60950-1
EN 60950
IEC/EN 61131-2
EMC certification:
IEC/EN 61000-6-2
IEC/EN 61000-6-4
Other certifications:
CE
EAC
DNV GL
ATEX dust explosion-proof certification (Zone 22, Category 3D)
Product features and advantages
Communication requirements: ensure that the type and quantity of interfaces provided by the product meet the system requirements.
Environmental conditions: confirm that the working environment parameters such as temperature and humidity are within the equipment specifications.
Software compatibility: Check the software compatibility with the existing system.
Expansion requirements: Evaluate whether additional storage or communication modules are needed.
summary
Eaton XV-102-BE-35TQR-10 Touch Screen HMI is an industrial-grade man-machine interface product with comprehensive functions and reliable performance. Its solid design, rich interfaces and powerful processing capacity make it an ideal choice for various industrial automation applications. Whether it is simple equipment monitoring or complex control system integration, this product can provide excellent performance and reliability.
Product overview
EATON XV-102-D8-57TVRC-10 is the XV100 series basic human-machine interface (HMI) product of Eaton Company, which is specially designed for industrial automation control. This 5.7-inch touch screen panel integrates PROFIBUS-DP field bus communication capability and is suitable for monitoring and control applications in various industrial environments.
Main technical specifications
physical characteristics
Size specification:
Length/Depth: 11 inches (279.4mm)
Height: 3 inches (76.2mm)
Width: 7.5 inches (190.5mm)
Weight: 1.73 pounds (about 785 grams)
Shell material: plastic material, with industrial protection performance.
Front panel: the standard blank front frame design is convenient for customized installation.
Display and operation
Display screen:
Type: 5.7-inch TFT LCD screen
Resolution: VGA standard (640×480)
Touch technology: resistive touch screen, supporting multi-touch
communication interface
Fieldbus: Integrated PROFIBUS-DP interface, supporting high-speed industrial communication.
Protocol compatibility: it conforms to PROFIBUS international standards and can be seamlessly connected with various PLC devices.
Product certification and compliance
Safety certification:
UL certification (USA)
CUL certification (Canada)
Environmental compliance:
RoHS directive compliance
CE mark authentication
Warranty policy:
1-year warranty (from installation date)
Or 18-month warranty (from the delivery date), whichever comes first.
application area
EATON XV-102-D8-57TVRC-10 touch panel is widely used in:
Industrial automation control system
Mechanical equipment operation interface
Process monitoring and data acquisition (SCADA) system
Production line control terminal
Equipment condition monitoring and fault diagnosis
Product advantage
Compact design: Small size is suitable for installation environment with limited space.
Sturdy and durable: plastic shell provides good adaptability to industrial environment.
Simple operation: resistive touch screen supports glove operation.
Reliable communication: PROFIBUS-DP ensures stable industrial communication.
Complete certification: A number of international certifications guarantee product quality and compliance.
Technical support and resources
Eaton provides comprehensive technical support for XV-102-D8-57TVRC-10:
Product manual: XV and XP series operator interface manual (document number PA04801003E)
Specification: XV-102-D8-57TVRC-10 Special Specification Sheet
Online resources: The latest technical information can be obtained through Eaton.com.
Purchase information
EAN code: 7640130096769
Manufacturer: Eaton Corporation plc
Headquarters address: Eaton House, 30 Pembroke Road, Dublin 4, Ireland.
summary
EATON XV-102-D8-57TVRC-10 is an industrial touch panel with reliable performance, economy and practicality. With its compact design, solid structure and standardized communication interface, it has become an ideal choice for small and medium-sized automation projects. Whether it is simple equipment control or complex system monitoring, this HMI can provide a stable and reliable operating experience.
Detailed explanation of Eaton E1016-1729 Cam-Lok J series insulated socket products
Temporary power distribution: such as power supply for construction sites and outdoor activities.
Industrial equipment connection: suitable for mechanical equipment with high current demand.
Renewable energy system: such as solar energy or power connection of wind power station.
Data center backup power supply: used for high-power connection of generators or UPS systems.
Product Manual: CAM-LOK Single Pole Plugs and Receivables
Installation guide: IM 1039 (panel installation), EB 141 (cable connection)
Specification: Eaton E1016-1729 Official Specification Sheet
Step 6 summarize
Eaton E1016-1729 is a high-performance, high-reliability Cam-Lok insulated socket, suitable for 400A high current applications. Its solid structure, safety certification meeting industry standards and easy installation make it an ideal choice in the field of industrial power connection. E1016-1729 can provide a stable and safe power transmission solution whether it is temporary power supply or fixed equipment connection.
P129740-002
Product number P129740-002
ABB type name
Catalogue describes SIO components, intelligent weights, interfaces, pre-processing.
general specification
Product details
Additional information -ABB model name
0.00 core credit
China countries or regions
origin
Undefined frame size
The total volume is 0.
0 lb gross weight
SIO components, intelligent weights, interfaces and pre-invoicing instructions
Not customized.
1 MOQ
1 order multiple
0 lbs. Packing Class 1 Total Weight
129740-002 Related product ID
Each sales unit
In the process of specialty selection and risk control, the interface configuration should be confirmed. The standard equipment includes two RJ45 Ethernet ports, four analog inputs and eight digital I/O channels, which meet the routine requirements. For special application scenarios, Profibus-DP or CC-Link module can be selected, but protocol compatibility should be paid attention to to ensure smooth system integration.The logo of the product with a net weight of 0 pounds indicates that the component is lightweight, suitable for cabinet installation with limited space, and can effectively save installation space.In addition, lightning protection circuit should be considered in the design of RJ45 Ethernet port to meet various international certification standards, such as EN55022, EN55024, FCC PART 15, etc. Attention should be paid to the filter design and PCB layout of the port to ensure the lightning protection performance and signal transmission quality of the interface.
