Archives

About the DS200AAHAH1AED

The DS200AAHAH1AED is a GE created ARCNET LAN Driver Board. This board was produced to be a component of the GE Mark V LM series of Speedtronic hardware. This board is no longer being supported by GE and may be a little hard to locate. Please consult AX Control for the availability of the DS200AAHAH1AED because we do attempt to keep it in stock. While this DS200AAHAH1AED PCB’s greater Mark V Series may exist as a legacy product series, it also is one of the final General Electric Speedtronic product series to make use of the patented Speedtronic control system technology first introduced with the rollout of the Mark I Series in the late 1960s. This DS200AAHAH1AED printed circuit board or PCB for short is not the original ARCNET LAN Driver Board created for insertion in the Mark V Series automated drive assembly; that would be the DS200AAHAH1 parent ARCNET LAN Driver Board not making use of this DS200AAHAH1AED device’s three significant product revisions.

Hardware Tips and Specifications

The DS200AAHAH1AED is a PCB that was meant to function within the MARK V’s control panel. It is also identified as an ARCNET Connection Board (AAHA). Like its name would suggest, this board is designed to act as a connection that links the main Control Engine and external drives to the ARCNET. The control engine actually resides within the <R> core. Two AAHA boards are actually needed within the <R> core. One of the boards needed by the core is a board that connects the COREBUS to the <R> core. In doing so, the control engine is allowed to communicate to the I/O cores that are also held within the <R> core.  This board also can connect to the PANA board. The second board grants a Stage Link connection to the user interface and the <R> core. The DS200AAHAH1AED is a very small and simple board. It has three communications ports on the top side. The leftmost port isn’t actually used and is an EBNC port. Beside of it are the ARCBNC-A and ARCBNC-B ports. 

​

Ge Speedtronic Mark V gas turbine control system is a version of ge’s long series of high-reliability electro-hydraulic control (EHC) systems for steam and gas turbine control.

About the 323A2374P3

The 323A2374P3 GE Display is designed as a mini terminal for use with General Electric’s Mark V turbine control system. The Mark V turbine control system has been used for managing industrial gas, steam, and wind turbines for decades, powered by General Electric’s patented Speedtronic control system technology. The Mark V Turbine Control System Series is only one of several Speedtronic systems our company maintains on-hand stock for. If you need replacement parts for any of the Speedtronic systems, from the Mark I to the Mark VIe, please talk to our team or look through our online inventory for more information. This 323A2374P3 Mini-Terminal Control Display is not functionally-named as many other component products within the Mark V Series are, which means that the contents of this personalized product page with be primarily based upon a visual inspection of the model, as conducted by one of our knowledgeable and experience printed circuit board technicians.

Hardware Tips and Specifications

The 323A2374P3 is a small LCD keypad and screen combination. This 323A2374P3 product functions as a mini terminal/point of control for the Mark V Series automated drive assembly that it was originally designed and manufactured for. The 323A2374P3 unit can mount directly to a unit using screw mounts and connects with the associated plug and wiring available along one long edge of the display. While this 323A2374P3 product is a member of the Mark V Turbine Control System Series from General Electric, it is not afforded a standard version of General Electric functional product number; most likely a result of its odd existence as a keypad and LCD screen display product. With this being true, if this 323A2374P3 device makes use of any particular Mark V Series assembly version, functional product acronym, base printed circuit board coating style, or functional product revision, it is unfortunately not able to be confirmed on this 323A2374P3 personalized product page here.

The 323A2374P3 display has a single small LCD panel that offers a two-line 40 character display. Below this display, the 323A2374P3 device’s front panel has four lines of touch-sensitive membrane switches. These keys offer more than one function, as they utilize the shift key located in the bottom left corner of the unit to access the secondary functions. The panel includes F1 through F20 keys, as well as scroll up and down, numeric keys, more, less, and raise/lower keys. Also included in this 323A2374P3 product offering’s keypad panel are a set of three buttons seemingly pertinent to the greater Mark V Series automated drive’s diagnostic fault alarm, labeled as “ALARM SIL,” “ALARM ACK,” and “ALARM RESET.” Refer to General Electric manuals for a more detailed look at this unit as well as specifics regarding its handling and installation; this 323A2374P3 product is identifiable as a GE Drive Systems Mini-Terminal product through the insertion of several General Electric logos and the GE Drive Systems company name on the front of the 323A2374P3 keypad itself.  Manuals and user guides should have been provided with your original purchase from the OEM.

323A2374P3-GE

IS420ESWAH2A Industrial Ethernet /IONet switch

About IS420ESWAH2A

IS420ESWAH2A industrial Ethernet /IONet switch was originally manufactured for the Mark VIeS turbine control system series of General Electric Company, as specified in the original printed instruction manual materials, and can be obtained through our convenient manual tab. The Mark VIeS turbine control system series, as you may have guessed, has the following characteristics based on its complete extended series name:

A set of specific application choices in the control and management system of General Electric Company-Compatibility;

wind

gas

And a steam turbine automatic drive assembly.

This is a great improvement on the previously developed Mark V series, because the Mark V series is only based on the possible applications of gas and steam turbines.

Being regarded as a member of, it is a more attractive prospect in the larger visual automation industry market.

It is considered to be one of the recently developed GE logo product series, with its patents and respected Speedtronic control system technology.

Hardware tips and specifications

IONet/ industrial Ethernet switch package IS420ESWAH2A is marked as an unmanaged industrial Ethernet switch. The model is designed to meet the specific requirements for keeping up with real-time industrial solutions. Some features required to meet the speed and functional requirements are as follows:

Redundant power input

Led indicating the following status:

speed

Duplex

activity

Links exist for each port.

100Base-FX multimode fiber port

All fiber ports will have LC type connections.

Considering the original GE manufacturing of IS420ESWAH2A device, it is classified as the functional product number of IS420ESWAH2A, which indirectly describes many hardware features, including the special modular components of IS420ESWAH2A device, the abbreviation of ESWA function, the coating style of conformal PCB, the second group of Mark VIeS series products, and its unique A-level functional product version.

IS420ESWAH2A installation tips and specifications

When installing the switch, you can use a variety of installation directions; Depending on the installation direction used, different clips are needed. For example:

If the IS420ESWAH2A switch is installed parallel to the guide rail on the long side of the switch body, the clamp required for installation is 259B2451BVP1.

Please note that this clip can be used for ESWA and ESWB switches.

When installing IS420ESWAH2A, there is no need for related basic accessories/components when installing the switch, and there are no replacement parts in the module.

After the switch is inserted, the estimated service life of RJ-45 connector should be 200 disassembly/insertion cycles.

IS420ESWAH2A Industrial Ethernet /IONet switch

Series: Mark V DS200
Part Number: DS200DCFBG2BNC
SKU: DS200DCFBG2BNCGBTC
About the DS200DCFBG2BNC
The DS200DCFBG2BNC is a Power Supply Board for the Mark V system from GE. The Mark V, which is one of the newest versions of the successful Speedtronic gas and steam turbine management system that has been developed by GE and released in various iterations since the late 1960s, relies on continued research and the use of the best technology available at the time of the system’s release to make improvements over previous systems. While the Mark V Turbine Control System Series may be one of the final General Electric Mark product series to utilize the Speedtronic control system technology, it must also be considered a now-obsolete legacy GE product series, considering its manufacturing discontinuation which took place in the many years following its initial release. This DS200DCFBG2BNC printed circuit board, although definable in its own right as a Mark V Series Power Supply Board, is by no means considered the original device of this Mark V Series functionality; that would be the DS200DCFBG2 parent Power Supply Board missing all three of this DS200DCFBG2BNC PCB’s three significant product revisions.

Hardware Tips and Specifications

The DS200DCFBG2BNC sends and receives input and output signals via eighteen plug connectors and nine stab connectors. These connectors, along with the rest of this DS200DCFBG2BNC PCB’s specialized hardware, introduce this DS200DCFBG2BNC product to its intended functional role as a Power Supply Board. The stab connectors are located in the upper left corner of the board and are labeled V1 through V3, P1A, P2A, VM1A , VM1B, VB2A and VM2BA. The plug connectors are located throughout the board and range from male 2 pin connectors to multi-pin connectors. As this DS200DCFBG2BNC printed circuit board product offering from General Electric is attributable to a now-obsolete legacy product series, its originally-printed instructional manual materials are not available in large swathes online for the research purposes of this DS200DCFBG2BNC personalized product page. With this being true, the DS200DCFBG2BNC functional product number itself gains a new importance, as it details general DS200DCFBG2BNC Board hardware components and component specifications in a series of functional naming chunks. For example, the DS200DCFBG2BNC functional product number begins with the DS200 series tag dictating this DS200DCFBG2BNC Power Supply Board’s normal Mark V Series assembly as well as its domestic original manufacture location. Some of the other relevant hardware details revealed in the DS200DCFBG2BNC functional product number include this DS200DCFBG2BNC PCB’s:
DCFB functional product abbreviation
Normal PCB coating style
Group 2 Mark V Series product grouping
B-rated primary functional revision
N-rated secondary functional revision
C-rated artwork configuration revision
The DS200DCFBG2BNC is built with seven DIP switches, five TP test points, twelve jumpers, and three fuses. The fuses are for power supply protection. Indicators will light if any of these fuses are blown. These include two LED lights and one neon indicator. DIP switches are used to select AC line voltage and the voltage applied to the DC bridge voltage feedback VCO circuit as well as to the DC motor voltage feedback circuit. The DS200DCFBG2BNC is populated with various components, including seven transformers, oscillating chips, a relay, over fifty resistor network arrays, heat sinks, and various integrated circuits, capacitors, and resistors. The board uses CCR (carbon composite) resistors and resistors made of metal film material.Technical support for the DS200DCFBG2BNC was provided by GE. Please refer to manuals, data sheets or other publications for safety data relating to this part. Before making any ultimate purchase decision on this DS200DCFBG2BNC product offering, it is crucial to realize that its originally-introduced performance specifications and general dimensions have almost certainly been altered by its possession of a full three-fold revision history as outlined above.

We currently have H201Ti  in stock and ready for immediate shipment.
В настоящее время у нас есть запасы H201Ti и готовы к немедленной отправке.
Hydran 201Ti (Mark IV)

Essential DGA monitoring for transformers

Transformers are key and expensive components of the electrical grid and knowledge of their health condition is essential to having a reliable network. When a transformer’s insulation system is overstressed, gases are produced that dissolve in the oil. Dissolved Gas-in-oil Analysis (DGA) is recognized as the best indicator of developing faults. The Hydran™ 201Ti is a small and easy to setup continuous Dissolved Gas-in-oil Analysis (DGA) monitor. It provides the basic information used by IEEE® Standard C57.104 and can be used as an essential first line of defence for the transformers in your fleet to obtain advance warning of a failure condition and minimize the risk of an unplanned outage. The 201Ti uses fuel cell technology (described as fixed instruments – method 3 in the standard) and is now available with a choice of either the world renown “Hydran Composite Gas” sensor which responds 100% to Hydrogen and is also sensitive to Carbon Monoxide, Acetylene and Ethylene or the more basic “Hydrogen Only” sensor which focuses purely on Hydrogen gas generation. Because the monitoring unit mounts on a single valve and uses Dynamic Oil Sampling, there is no need for a pump or extra piping to connect to different valves. Due to its uncomplicated features and the easily understood information it provides, the 201Ti has been amongst the monitors of choice for many years, with one of the largest installed base of any DGA monitor.

Key Benefits

• Continually measures key fault gas to give you an insight into the transformer’s condition 

• Choice of gas sensor: traditional “Composite gas” or more basic “Hydrogen only” 

• Communicates gas ppm and gas rate of change values remotely to avoid site visits and enable remote supervision 

• Fourth generation of this continuously improved design, with over 25,000 units sold worldwide

Applications

Power Utilities

• Simple and effective solution for less-critical transformers 

• Focuses and prioritizes asset replacement strategy

Industrial Plants

• Reduces the risk of process interruption due to power failure 

• Minimizes costly production downtime

Controllers

The Hydran 201Ti can be connected to optional controllers to facilitate communication with multiple units and create a local network. • The Ci-1 controller is a one channel controller that replicates some of the human interface functions (gas value display, alarm buttons). This is ideal when the 201Ti is mounted out of reach on an upper valve of the transformer. It also brings down the alarm relay contacts and the analogue output for easier wiring. • The Ci-C controller receives the gas ppm data from up to four 201Ti, providing a single communication point for all four monitors. It has no alarm relay or analogue output. This is ideal when protecting 3 single phase transformers + 1 spare. It is possible to “daisy-chain” up to 32 controllers or 201Ti through their RS-485 port. The maximum chain distance (all cables added up) is 1200m (4000ft). All the 201Ti connected to any of the daisy-chained controllers can be accessed through any controller in the local network, thus facilitating communication by only having to fit one RS-232 modem for example.

2301A Series 9907-1200 digital control Installation and Operation ManualPDF