MM4-4TX/SFP introduced by Hirschman Automation and Control Co., Ltd. is an industrial-grade Gigabit Ethernet media module, which is suitable for various industrial application scenarios. Its main features include:
Port configuration: The equipment provides four ports, supporting 10/100/1000BASE-TX (twisted pair) and 1000BASE-SX/LX (optical fiber), and users can choose any combination as required. For example, an SFP module can replace a TX port, and up to four ports can be used at the same time.
Network size: Supported cable lengths range from 0 to 100 meters (twisted pair), as well as 50/125 or 62.5/125 micron multimode fiber and 9/125 micron single mode fiber. These optical fiber modules need to be used with corresponding LC connectors.
Power supply and power consumption: The device is powered by the power supply of the mouse switch backplane, with a power consumption of 2W, which is characterized by low energy consumption.
Diagnosis and environment: The equipment is equipped with diagnostic indicator lights, including power status, link status, data transmission rate (1000Mbit/s), auto-negotiation and full-duplex mode. The working temperature range is 0℃ to 60℃, the storage and transportation temperature range is -25℃ to 70℃, and the relative humidity is 10% to 95% (non-condensing).
Mechanical characteristics: the size of the equipment is 38mm x 134mm x 118mm, the weight is 180g, and the protection grade is IP20. It is suitable for installation on DIN guide rail and has good mechanical stability.
EMC performance: The equipment conforms to FCC CFR47 Part 15 and EN 55022 standard, has anti-interference ability and is suitable for electromagnetic interference scenes in industrial environment.
Certification and safety: The equipment meets the safety standard of industrial control equipment (cUL 508) and the certification of dangerous places (cUL 1604 level 2).
MM4-4TX/SFP is a powerful, flexible and reliable industrial Ethernet media module, which is suitable for industrial network environments that need high reli

MM4-4TX/SFP introduced by Hirschman Automation and Control Co., Ltd. is an industrial-grade Gigabit Ethernet media module, which is suitable for various industrial application scenarios. Its main features include:
Port configuration: The equipment provides four ports, supporting 10/100/1000BASE-TX (twisted pair) and 1000BASE-SX/LX (optical fiber), and users can choose any combination as required. For example, an SFP module can replace a TX port, and up to four ports can be used at the same time.
Network size: Supported cable lengths range from 0 to 100 meters (twisted pair), as well as 50/125 or 62.5/125 micron multimode fiber and 9/125 micron single mode fiber. These optical fiber modules need to be used with corresponding LC connectors.
Power supply and power consumption: The device is powered by the power supply of the mouse switch backplane, with a power consumption of 2W, which is characterized by low energy consumption.
Diagnosis and environment: The equipment is equipped with diagnostic indicator lights, including power status, link status, data transmission rate (1000Mbit/s), auto-negotiation and full-duplex mode. The working temperature range is 0℃ to 60℃, the storage and transportation temperature range is -25℃ to 70℃, and the relative humidity is 10% to 95% (non-condensing).
Mechanical characteristics: the size of the equipment is 38mm x 134mm x 118mm, the weight is 180g, and the protection grade is IP20. It is suitable for installation on DIN guide rail and has good mechanical stability.
EMC performance: The equipment conforms to FCC CFR47 Part 15 and EN 55022 standard, has anti-interference ability and is suitable for electromagnetic interference scenes in industrial environment.
Certification and safety: The equipment meets the safety standard of industrial control equipment (cUL 508) and the certification of dangerous places (cUL 1604 level 2).
MM4-4TX/SFP is a powerful, flexible and reliable industrial Ethernet media module, which is suitable for industrial network environments that need high reli

Hirschmann)MM4-2TX/SFP/SFP media module is a high-performance device specially designed for industrial Ethernet, which is suitable for MICE switches MS4120 and MS30 series. The module is powered by backplane and supports dual-port SFP interface, which can meet various network application requirements.

The main features of this module include:

Compatibility: MM4-2TX/SFP module is specially designed for Hirschmann PowerMICE management switch, which supports seamless integration with MS4120 and MS30 series switches.

Power supply mode: the module obtains power from the backplane of the switch without additional power supply, which simplifies installation and maintenance.

Transmission rate: Support the transmission rate of 1000 Mbps, which is suitable for high-speed data transmission.

Modular design: This module adopts modular design, which is convenient for expansion or replacement in the existing network and improves the flexibility and reliability of the system.

Global transportation and warranty: products can be transported by international logistics companies such as DHL, UPS and FedEx, and provide worldwide warranty services.

MM4-2TX/SFP module also has the following advantages:

High reliability: It is suitable for complex network requirements in industrial environment to ensure the stability and efficiency of the network.

Easy installation: the module is easy to install, and users can quickly deploy and optimize network performance.

Flexible application: Suitable for scenarios that need to expand network ports or improve network performance, such as factory automation and data centers.

Hirschman MM4-2TX/SFP media module is a powerful and reliable industrial-grade network device, which is suitable for network environments that need high performance and reliability. Its modular design and global warranty service further enhance the user experience and the long-term stability of the equipment.

MS4128-L2P

MS4128-L3E

MS4128-L3P

MS4128-L2P ATEX

Hirschmann MM20-P9P9T1T1SAHH is a high-performance industrial Ethernet media converter, which is suitable for various industrial environments. This product combines the consistent high quality and reliability of Hirschman brand, and is widely used in factory automation, remote monitoring and data transmission.

As a media converter, MM20-P9P9T1T1SAHH supports multiple communication protocols and can realize seamless connection between optical fiber and copper cable, thus providing stable and reliable communication performance. This feature enables it to operate normally in harsh environment, such as factory workshop or outdoor environment. In addition, the equipment also has flexible interface configuration and redundant design, which is convenient for users to adjust and manage according to their needs.

As a leading enterprise in the field of automation communication, Hirschman’s products usually have high performance characteristics, which can support high-speed data transmission and low-delay communication and meet the needs of modern network communication. MM20-P9P9T1T1SAHH is no exception, and its design aims to provide efficient and reliable solutions for industrial automation.

Hirschmann MM20-P9P9T1T1SAHH is a powerful and adaptable industrial Ethernet media converter, which is suitable for industrial application scenarios requiring high reliability and high performance network connection.

MM3-2FXS2/2TX1

MM3-4FXS2

MM3-1FXL2/3TX1

MM4-4TX/SFP

MM4-2TX/SFP

MM20-P9P9T1T1SAHH

Important information 

Note: Read these instructions carefully, and familiarize yourself with the device before trying to install, operate, or maintain it. The following notes may appear throughout this documentation or on the device. These notes warn of potential hazards or call attention to information that clarifies or simplifies a procedure.  Symbol explanation This is a general warning symbol. This symbol alerts you to potential personal injury hazards. Observe all safety notes that follow this symbol to avoid possible injury or death. If this symbol is displayed in addition to a safety instruction of the type “Danger” or “Warning”, it means that there is a danger of electric shock and failure to observe the instructions will inevitably result in injury. This symbol indicates the danger of hot surfaces on the device. In connection with safety instructions, non-observance of the instructions will inevitably result in injuries.

Safety instructions

UNCONTROLLED MACHINE ACTIONS To avoid uncontrolled machine actions caused by data loss, configure all the data transmission devices individually. Before you start any machine which is controlled via data transmission, be sure to complete the configuration of all data transmission devices. Failure to follow these instructions can result in death, serious injury, or equipment damage

Certified usage 

 Use the device solely for the application cases described in the Hirschmann product information, including this manual. Operate the device solely according to the technical specifications.

 Supply voltage The devices are designed for operation with Safety Extra-low Voltage (SELV). Connect only SELV circuits with voltage restrictions according to IEC 60950-1 or ES1 according to IEC/EN 62368-1 to the supply voltage connections and to the signal contacts. The supply voltage is electrically isolated from the housing.

 Use undamaged parts.

 For power supply via DC voltage: All following prerequisites are fulfilled:

 There are fuses suitable for DC voltage in the positive conductors of the supply lines, or the voltage sources are appropriately current limited. Regarding the properties of this fuse: See “General technical data” on page 67.

 The negative conductors of the voltage inputs are on ground potential.

 For power supply via AC voltage: All following prerequisites are fulfilled:

 There are fuses in the supply lines, or the voltage sources are appropriately current-limited. Regarding the properties of this fuse: See “General technical data” on page 67.

 The power sources are electrically isolated from the ground

 Relevant for North America: The device may only be connected to a Class 2 supply voltage that fulfills the requirements of the National Electrical Code, Table 11(b). If the voltage is being supplied redundantly (two different voltage sources), the combined supply voltages must fulfill the requirements of the National Electrical Code, Table 11(b).

 Relevant for North America: For use in Class 2 circuits. Only use copper wire/conductors of class 1, 75 °C (167 °F). Start connecting the electrical wires only if all the above safety requirements are fulfilled

Use in Hazardous Locations

Relevant for North America for modules certified for Hazardous Locations: This equipment is suitable for use in Class 1, Division 2, Groups A, B, C and D or Non-Hazardous (unclassified) locations only. Make sure that peripheral devices are suitable for the application environment. The wiring for the voltage supply and for the inputs and outputs (I/O) must adhere to the wiring regulations for Class 1, Division 2 [article 501(b) of the National Electrical Code (USA), NFPA 70] and to the applicable statutory regulations. Note: Observe the control drawing (document number 000160011DNR) on the following pages. Avertissement – Risque d’explosion – Ne pas débrancher tant que le circuit est sous tension à moins que l’emplacement soit connu pour ne contenir aucune concentration de gaz inflammable. Avertissement – Risque d’explosion – La substitution de tout composant peut rendre ce matériel incompatible pour une utilisation en classe I, division 2

Hirschmann is a leading company in the field of automation communication, and its products are widely used in industrial networks and communication fields. This paper will introduce in detail a managed Ethernet switch in Hirschman-MM20 series, the specific model is MM20-Z6Z6E6, and its related characteristics.

1. Brand and manufacturer background
Hirschmann is a well-known German supplier of automation and communication equipment, and its product line covers industrial Ethernet switches and communication modules. Hirschman is famous for its high performance and reliability, and is committed to providing advanced solutions for industrial automation. For example, its MM20 series switches are widely used in industrial environment to meet the requirements of high-speed data transmission and low-delay communication.

2. Product category and model
Hirschman’s MM20 series belongs to managed Ethernet switches, and its models include MM20-z6z, MM20-6z, MM20-6e, etc. These models belong to industrial Ethernet switches and are suitable for various industrial environments. These switches usually have high reliability and performance, and can support complex network requirements.

3. Technical characteristics
Hirschman’s MM20 series switches have the following technical features:

High performance: MM20 series switches support high-speed data transmission and are suitable for industrial application scenarios requiring high bandwidth and low latency. Its design ensures efficient data transmission and processing capacity, thus meeting the needs of modern network communication.
Modular design: this series of switches supports modular design, and users can choose different modules according to their needs to expand their functions. For example, modules supporting PoE (Power over Ethernet) can be selected to realize remote power supply to network devices.
Redundancy and reliability: MM20 series switches support redundancy design, including power supply and network interface, to ensure rapid switching in case of failure, thus ensuring the continuity and stability of the network.
Flexible configuration: Through the specific vendor Ethernet switch proxy object, the switch can be configured in detail, including status monitoring, power management, signal contact, etc., to meet different industrial needs.
4. Application scenarios
MM20 series switches in Hirschman are widely used in industrial automation, intelligent manufacturing, energy management and transportation system. For example:

Industrial automation: In the field of industrial automation, MM20 series switches can be connected with PLC, sensors, actuators and other equipment to realize real-time data transmission and control. This efficient data exchange ability is very important for improving production efficiency and equipment utilization.
Intelligent manufacturing: In intelligent manufacturing, MM20 series switches support a variety of industrial protocols and can realize seamless connection and communication between devices, thus supporting the operation of intelligent factories.
Energy management: In the field of energy management, MM20 series switches can be used to monitor and manage the running state of energy equipment and optimize energy efficiency.
5. Accessories and compatibility
MM20 series switches in Hirschman support various accessories, such as FIFO module (first-in, first-out queue) for buffering time stamp data, and data processing and control module for parsing and controlling data packet transmission. The integration of these modules makes MM20 series switches more efficient and flexible when dealing with complex data.

6. Market evaluation
Hirschman’s MM20 series switches are highly praised by the market for their high performance, reliability and flexibility. Many users believe that MM20 series switches can not only meet the current industrial needs, but also have good expansibility and compatibility, and can adapt to the future technological development.

Step 7 summarize
Hirschman’s MM20-Z6Z6Eseries switch is an industrial Ethernet switch with high performance and reliability, which is suitable for many industrial scenes. Its modular design, redundant configuration and flexible configuration options make it an important tool in the field of industrial automation and intelligent manufacturing. With its professional technology and rich experience in the field of automation communication, Hirschman continues to provide customers with high-quality solutions.

Hirschman (mm2-4tx1-EEC) is a managed Ethernet switch, which belongs to high-performance network equipment in the field of industrial automation. This article will introduce this product in detail with relevant information.

Brand background and product positioning
Hirschmann is one of the world’s leading manufacturers of industrial automation and network equipment, focusing on providing high-performance and high-reliability industrial-grade network solutions. Its products are widely used in industrial Ethernet, real-time communication and network management. As a part of its product line, MM2-4TX1-EEC inherits the consistent characteristics of high quality and technological innovation in Hirschman.

Product category and functional characteristics
MM2-4TX1-EEC belongs to the category of managed Ethernet switch, which is mainly used for data transmission and network management in industrial environment. This kind of switch usually supports a variety of communication protocols and interface types, which can meet the needs of complex industrial networks. For example, other types of switches in Hirschman, such as MM20 series and Mach 3000 series, all have flexible scalability, high throughput and strong redundancy.

Technical specifications and performance characteristics

It supports high-speed data transmission and conforms to industrial Ethernet standards (such as 1000Base-T).
Provide a variety of interface types (such as RJ45 port), and support auto-negotiation and link aggregation.
Have good environmental adaptability and be able to run stably in industrial environment.
Support HIPER-Ring redundancy technology to ensure high availability and fault tolerance of the network.
4. Application scenarios and advantages
The MM2-4TX1-EEC is suitable for industrial scenes that require high reliability and real-time communication, such as factory automation, process control and distributed control system (DCS). Its advantages include:

High performance: support high-speed data transmission and multi-layer network protocols, and meet the strict requirements of real-time and reliability in industrial environment.
Flexibility: Support a variety of interfaces and configuration options, which can be flexibly expanded according to actual needs.
Reliability: Through HIPER-Ring redundancy technology, the network can still recover quickly when there is a fault, thus ensuring the continuity of production.
5. Market positioning and competition analysis
Hirschman occupies an important position in the global industrial automation market, and its products are famous for their high performance and reliability. Compared with other brands, Hirschman’s products usually have higher throughput and stronger environmental adaptability. However, there are other competitors in the market, such as Banner and other industrial Ethernet equipment manufacturers, which may have more price advantages in some market segments.

Step 6 summarize
Hirschman MM2-4TX1-EEC is a high-performance managed Ethernet switch, which is suitable for complex network environment in the field of industrial automation. With its flexible configuration options, strong performance and reliability, MM2-4TX1-EEC can meet the high requirements of real-time communication and network stability in industrial environment.