FMC176 FPGA Mezzanine Card

Analog input and output

Overview

The FMC176 is a quad channel ADC and dual channel DAC FMC. This daughter card provides four 14-bit A/D channels at 250Msps and two 14-bit D/A channels at 5.6Gsps (2.8Gsps direct RF synthesis) clocked by either an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. In addition, a trigger input for customized sampling control is available to users.

It is mechanically and electrically compliant with the FMC standard (ANSI/VITA 57.1).

FMC176

The FMC176 has a high-pin count connector, front panel I/O, and can be used in a conduction cooled environment. The design is based on Analog Devices’ AD9250 dual channel 14-bit 250Msps Analog-to-Digital converter and Analog Devices’ AD9129 single channel 14-bit 5.6Gsps Digital-to-Analog converter. The analog signals are AC-coupled, connecting to MMCX or SSMC coax connectors on the front panel. The FMC176 allows flexible control of clock source, analog input gain and over range detection through serial communication buses.

Furthermore, the card is equipped with power supply and temperature monitoring and offers several power-down modes to switch off unused functions in order to reduce system level power consumption. It is well suited for low power applications such as airborne where the highest level of performance is required while ensuring that mission range is not affected.

FMC176

Board Support Package

Our Board Support Package helps customers get their hardware implementation underway as quickly as possible by providing reference designs, the Stellar IP FPGA development tool, and the 4FM GUI user interface for controlling and monitoring the hardware, as well as other supporting elements.

3920-01080
3920-00800
3920-00238
3880-51207
3880-01288
38800-01638
3870-90155
3870-06775
3870-05647
3870-04569
3870-03835
3870-03151
3870-02656
3870-02612
3870-02228
3870-01950
3870-01811
3870-01350
3870-01300

FMC172 FPGA Mezzanine Card

Wideband Low Latency FMC Module

Overview

Higher Performance, Low Latency, High Sample Rates

The Abaco FMC172 wideband low latency FMC module is based on the latest high performance ADC device from Texas Instruments and DAC devices from Teledyne-E2V. It is the fastest ADC Abaco offers with LVDS interfaces, delivering up to 6.4 GSPS ADC on a single channel (or two channels @ 3.2 GSPS) and a single channel DAC at up to 6.0 GSPS, making it among the fastest low-latency devices available on the market. The combination of the FMC172’s >6.0 GHz bandwidth, its high sample rate and low latency is ideal for advanced Digital RF Memory (DRFM) systems.

FMC172

When paired with Abaco’s state-of-the-art FPGA carrier cards such as the VP889 or VP869, the FMC172 gives customers the platform to solve some of the most difficult challenges when designing modern DSP systems.

High Bandwidth

The FMC172 provides customers with another option to expand bandwidth for analog receivers and transmitters. The previous generation FMC170 supported one channel at 5GSPS in both input and output; the FMC172 extends this to 6.4GSPS at 10-bits, or two ADC channels at 3.2 GSPS. This is an excellent example of how the evolving FMC standard allows customers who invest in this powerful mezzanine-based architecture to continue to evolve their analog I/O FPGA based systems with minimal changes to their existing DSP and FPGA architecture.

412667-PJ
4100-060G-M02
40-753-004-3
4074513-0010
407-0401
4060-01365
40-20329-PB
402-0301
4020-01094
4020-01061
4020-01060
4020-00084
3NT520B-A048
3940-01044
3940-01023
3930-01083
3930-00092
3930-00005

Abaco FMC168 FPGA Mezzanine Card   Analog input

Overview

The FMC168 is a digitizer FMC featuring eight ADC channels with 16-bit resolution and 250Msps sampling rate per channel.

With a flexible clock generation and distribution scheme, the FMC168 allows control of sampling frequency and analog input gain through serial communication with a carrier card.

The FMC168 design is based on the TI ADS42LB69 dual channel 16-bit 250Msps A/D, is equipped with power supply and temperature monitoring, and offers several power-down modes to switch off unused functions.

Board Support Package

Our Board Support Package helps customers get their hardware implementation underway as quickly as possible by providing reference designs, the Stellar IP FPGA development tool, and the 4FM GUI user interface for controlling and monitoring the hardware, as well as other supporting elements.

Specifications

Channels

8

Cooling

Air, Conduction

Coupling

AC or DC

Data Rate

250 Msps

FMC Connector

HPC

Form Factor

FMC

Function

Analog Input

Resolution

16-bit

Signaling

LVDS

Abaco  FMC160 FPGA Mezzanine Card  Analog input and output

Overview

The FMC160 provides one 12-bit A/D channel at 3.6Gsps and one 14-bit D/A channel at 5.7Gsps (2.85Gsps direct RF synthesis) clocked by either an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. In addition, a trigger input for customized sampling control is available to users. It is mechanically and electrically compliant with the FMC standard (ANSI/VITA 57.1).

FMC160

With a high-pin count connector, front panel I/O, and able to be used in a conduction cooled environment, the design is based on Texas Instruments’ ADC12D1800 Analog-to-Digital converter and Analog Devices’ AD9129 Digital-to-Analog converter. The analog signals are AC-coupled, connecting to MMCX or SSMC coax connectors on the front panel.

The FMC160 allows flexible control on clock source through serial communication buses.

Furthermore, the card is equipped with power supply and temperature monitoring and offers several power-down modes to switch off unused functions in order to reduce system-level power consumption. It is well suited for low power applications such as airborne where the highest level of performance is required while ensuring that mission range is not affected.

FMC160

Board Support Package

Our Board Support Package helps customers get their hardware implementation underway as quickly as possible by providing reference designs, the Stellar IP FPGA development tool, and the 4FM GUI user interface for controlling and monitoring the hardware, as well as other supporting elements.

7100-6443-01C
70314510110W
6C50SHCS
64-81813-00
646506 Ceramic   Riser – Pack of 25
61-0367-38
60V
58900145R
5834R A   5000/5200
5700X
5400-D-0065
5400-D-0025
531796-2 9005
5070-01063
5023-122
50184 VE50184
500-3002-102
5000-170
5000-158
5000-138
5000-049
4699898-0001
46-406121-01
45800978-2
4315-0017

Abaco  FMC150 FPGA Mezzanine Card  Analog input and output

Overview

The FMC150 is a dual channel ADC and dual channel DAC FMC daughter card. The card provides two 14-bit A/D channels and two 16-bit D/A channels which can be clocked by an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. In addition there is one trigger input for customized sampling control. The FMC150 daughter card is mechanically and electrically compliant to the FMC standard (ANSI/VITA 57.1). The FMC150 has a low-pin count connector, front panel I/O, and can be used in a conduction cooled environment. The design is based on TI’s ADS62P49 dual channel 14-bit 250Msps ADC and TI’s DAC3283 dual channel 16-bit 800Msps D/A. The analog signals are AC coupled connecting to MMCX or SSMC coax connectors on the front panel. The FMC150 allows flexible control on clock source, analog input gain, and offset correction through serial communication busses. Furthermore the card is equipped with power supply and temperature monitoring and offers several power-down modes to switch off unused functions, reducing system level power and heat and is well suited for software defined radio (SDR), battery or other low power source applications. This is ideal for applications such as airborne where power demand effects mission range and on-station mission time.

FMC150

Board Support Package

Our Board Support Package helps customers get their hardware implementation underway as quickly as possible by providing reference designs, the Stellar IP FPGA development tool, and the 4FM GUI user interface for controlling and monitoring the hardware, as well as other supporting elements.

FMC150

9101-1745

91-00740A

91-00306A

9090-01275

9090-01251

9090-01247

9090-01095

9090-01060

9090-00962

9090-00835

9090-00115

907.00.05

903172-001

8916-AF89-FC-S

881-CE-0209-00

8300L

81-57228R

8112579G003

81105-01

8100C

8045R2-1

78G2418

7801-D-1226

7801-D-1222

7801-D-1010

750-677456-00

72007-24

712-7428

Abaco  FMC134 FPGA Mezzanine Card   Direct RF conversion module

Overview

The FMC134 provides customers with a high bandwidth and high channel count I/O solution that is ideal for multi-channel receivers in a wide range of applications.

With four 12-bit analog-to-digital channels up to 3.2GSPS or two analog channels up to 6.4GSPS, the FMC134’s design is based on the Texas Instruments™ ADC12DJ3200 and is mechanically and electrically compliant with the FMC+ standard (VITA 57.4), the next generation of small form factor expansion I/O for high performance FPGA-based systems.

FMC134

The A/D JESD204B data interface connects to an FPGA using 16 of the 24 high speed serial lanes available on an FMC+ high serial pin count (HSPC) connector. The unused eight high speed serial lanes are passed to the top of the board, enabling the potential for FMC stacking.

The sample clock can be supplied externally through a coax connection or supplied by an internal clock source (optionally locked to an external reference) for multi-board and multi-channel synchronization.

FMC134

The board also includes an external trigger input and two reference outputs that can be enabled for multi-board synchronization.

The front panel I/O can optionally be populated with MMCX or SSMC

APAC-36024

APAC-360120

APAB-3160

AP001871-00

AMAT-P5000

AM9090-00923IT

AM10055

AFC 550

ADS-432-303

ABI 7500

A-5225-0565

A43062

A3202

A215300-017-C2

99N0690

9781844074013

9768-1002

973H80808-47

9701-0417-01

95-250VAC

921-005477-028

91-01293A

91-01293

Abaco  FMC126 FPGA Mezzanine Card  Multi-mode analog input

Overview

The FMC126 is a quad-channel multi-mode A/D FMC, fully compliant with VITA 57.1 standards.

The card provides four 10-bit ADC channels that enable simultaneous sampling of 4, 2, or 1 channel with a maximum sample rate of 1.25 GSPS (4-channel mode), 2.5 GSPS (2-channel mode), or 5.0 GSPS (1-channel mode).

The sample clock can be supplied externally through a coax connection or supplied by an internal clock source (optionally locked to an external reference). Additionally a trigger input for customized sampling control is available.

The FMC126 daughter card is mechanically and electrically compliant to the FMC standard as established by ANSI/VITA 57.1. It has a HPC (high pin count) compatible connector, front panel I/O, and can be used in a conduction cooled environment.

The design is based on the E2V Quad A/D EV10AQ190 chip-set having DDR LVDS outputs. The analog signal inputs are available on the front panel on coax connections and have individual calibration circuits for fine-tuning of gain, offset, and phase.

The FMC126 allows flexible control of clock source, sampling frequency, and calibration through the I2C serial communication bus. Further, the card is equipped with power supply and temperature monitoring and offers several power-down modes to switch off unused functions.

Board Support Package

Our Board Support Package helps customers get their hardware implementation underway as quickly as possible by providing reference designs, the Stellar IP FPGA development tool, and the 4FM GUI user interface for controlling and monitoring the hardware, as well as other supporting elements.

FMC126

FMC126

AXF-450-1   17-3/4

AXF-350   13-3/4

AXF-300   11-3/4

AX8200D

AWG2/R-VIA

ASY-0643B

AS01391-21-1

AS00021-02

APSA-597 7/8

APSA-384 1/2

APSA-3105 5/8

APRV-VA06

AP-PT034 3/4

APMG-A3B36S

APIS-120-34

APHT-3SW

APFM-342E 34W

APFM-161E 16W

APFD-115S

APDH-HB6-2

AP-C11845B5

APBV-158 1-5/8

APBV-078

APAC-37524

APAC-360240

FMC120 FPGA Mezzanine Card Analog input and output

Overview

The FMC120 provides four 16-bit A/D channels up to 1Gsps, four16-bit D/A channels up to 1.25Gsps and up to 2.8Gsps sample rate with interpolation. The devices can function up to 1Gsps during simultaneously D/A and A/D operation as the clock source is shared.

The design is based on Texas Instruments’ ADS54J60 Analog-to-Digital converter and Texas Instruments’ DAC39J84 Digital-to-Analog converter.

The sample clock can be supplied externally through a coax connection or supplied by an internal clock source (optionally locked to an external reference). Additionally, a trigger input is available for customized synchronization.

FMC120

The FMC120 is mechanically and electrically compliant to the FMC standard (ANSI/VITA 57.1). The card connects to an FPGA carrier card through a standard high-pin count (HPC) connector. Front panel I/O can optionally be populated with MMCX or SSMC coaxial connectors.

Analog I/O is DC coupled.

The FMC120 is designed to be used in convection- or conduction cooled environments. When paired with the latest FPGA carrier cards such as the 4DSP VP868 with Xilinx Ultrascale technology, customers can innovate high performance algorithms on an industry standard platform.

FMC120

Board Support Package

Our Board Support Package helps customers get their hardware implementation underway as quickly as possible by providing reference designs, the Stellar IP FPGA development tool, and the 4FM GUI user interface for controlling and monitoring the hardware, as well as other supporting elements.

DIP-510-002

DIP-360-002

DIP294-2

DIP-280-015

DIP-210-010

DE_SY.220955-A

D-E15001590

DDM-005X-DN-AM

DAS200_2

D-681810

CX87-057481-11

CT5085-434535-12

CSM34X3L-A

CR104PXG48

CPCI-100-BP-S0

CONB-16198

CG2NDD050R2

C5301070

C3001

C190238

C-1340-005-000

BXC20R-23CS-08

BM11710

BLSI7080

B804950-47

B2-FKM

AXF-600-4   23-5/8

AXF-500-4   19-3/4

Abaco FMC116 FPGA Mezzanine Card  Analog input

Overview

The FMC116 is a 16-channel ADC FMC daughter card which is fully compliant with the VITA 57.1-2008 standard. The FMC116 provides 16 A/D 14-bit 125Msps channels which can be sampled by an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. A trigger input for customized sampling control is also available.

Featuring the HPC (high-pin count) connector and front panel I/O, the FMC116 is conduction-cooled capable.

The design is based on Linear Technology’s quad channel 14-bit 125Msps A/D with high speed serial DDR LVDS outputs (two lanes per channel).

FMC116

The analog signal input is DC-coupled with offset correction circuitry, connecting from a connector on the front panel.

The FMC116 allows flexible control on sampling frequency through serial communication buses. Further, the card is equipped with power supply and temperature monitoring and offers several power-down modes to switch off unused functions or protect the card from overheating.

Board Support Package

Our Board Support Package helps customers get their hardware implementation underway as quickly as possible by providing reference designs, the Stellar IP FPGA development tool, and the 4FM GUI user interface for controlling and monitoring the hardware, as well as other supporting elements.

FMC116

MA-12432

M4X20MMLG

M3399X

LR-3000

LI-9496

LCAT200P-20001

J244

HPM 2

HP020RZZ250

G170069520

FC-0010-0047

ESC-W2

ELB-600-CES-GR

E-710K126X

E19331840

E19321290

E17812690

E17581350

E17296930

E17026553

E16434990

DP-200-5F

DNP-CPCI-2

DIP-510-005

Abaco FMC300 FPGA plate

Overview
Introducing the FMC300 Wideband Low Latency FMC Module – the ultimate solution for cutting-edge SDR, electronic warfare (EW), and digital radar applications.  Engineered to meet the evolving demands of modern systems, this revolutionary module integrates high-performance Analog-to-Digital Conversion (ADC) and Digital-to-Analog Conversion (DAC) capabilities.  With options for up to 6 GSPS RF ADC and 12 GSPS RF DAC channels, the FMC300 delivers unmatched performance and versatility.  Its modular design, compliant with the VITA 57.4 industry open standard, ensures seamless integration and interoperability.

But the FMC300 isn’t just about raw power – it’s about empowering innovation.  With flexible control options for clock source, sampling frequency, and calibration, the FMC300 ensures optimal performance and adaptability to suit your specific application needs.  Equipped with individual calibration circuits for fine-tuning of gain, offset, and phase, as well as advanced monitoring and power-down modes, this innovative module sets a new standard for embedded computing solutions.

Whether you’re designing advanced SDR systems, tackling electronic warfare challenges, or pushing the boundaries of digital radar, the FMC300 provides the platform you need to succeed.  Experience the future of embedded computing with the FMC300 from Abaco Systems.

SP1993-5311

SHS15V1UUC1FME

SCOM-0800

RC880

QS-100NP-MP

Q390-047457

PSE520-02

PMBB-103792

PH265-05B-C12

PD5580

PAM-BKP3

PAC-840000-0IA 7221081

PAA300F-24

P5000

P042426

N8010560

MQDB011AAD03

MEC81105-201L

ME07-9601-0/EM

MA-50613

MA-14639