VME-5532L VME Bus Repeater

VMEbus Fiber-Optic Repeater Link with Slave Chassis System Controller

Overview

High performance

Easily link your VMEbus systems via fiber-optic cable, with total electrical isolation, no EMI generation and high-noise immunity.

Isolation and control

A two-board set allows a master in one chassis to control I/O boards in another. It’s total plug-and-play operation; no software overhead.

Specifications

Addressing:

16, 24, 32

Data Transfer Bits

8, 16, 32

Distance

5 ft to 6,560 ft

Form Factor

VME

Link Cable

Fiber Optic Cable

Other

VMEbus Fiber-Optic Repeater Link

VME-5532L

VME-4905

VME-4905 High Power Digital-to-Synchro/Resolver Converter Board

Overview

The VME-4905 board, with supported Built-in-Test hardware, features both offline and online fault detection and isolation. The board accepts a 14-bit digital output word (shaft angle), a reference excitation voltage,and produces a synchro or resolver output.

• Nonprivileged or supervisory short I/O
• 5 VA, 2 VA (transformer output), or 0.024 VA options
• Amp D-type (no. 206584-1)
• Internal transformers (400 Hz options)
• Front panel fail LED
• 3- or 4-wire output for driving synchros or resolvers
• 14-bit converter with an accuracy as high as ±1 arc minute (±4 arc minutes is standard)
• Supports off-line and on-line fault detection and isolation
• Compatible with Intelligent I/O Controllers
• SpecificationsChannel Voltage Ranges6.81, 11.8, 40.0 VChannels2Form FactorVMEFunction14-bit Digital-to-Synchro/ResolverThroughputDC to 1 kHz
• 
  

VME Analog I/O Output Boards

Overview

The VME-4120 Analog Output Board provides 16 high-quality analog output channels. These channels are jumper-selectable for voltage outputs, current loop outputs, or a combination of voltage and current loop outputs. Each output range is also jumper-selectable.

• 16 analog output channels
• Jumper-selectable voltage or current outputs
• Current transmitter ranges (0 to 20mA, 4 to 20mA, and 5 to 25mA)
• Output voltage ranges (0 to +5V, 0 to +10V, ±2.5V, ±5V, ±10V)
• Complies with VMEbus specification:
  • ANSI/IEEE STD 10
  • IEC 821 and 297
• 12-bit resolution
• Front panel outputs (P3)
• On-board DC-to-DC converter or external power supply option
• Optional voltage-only outputs
• VME-4120
• AS-E785-904ALU130236017170-BDI-344-00110CPU31100DR-1010-000AS-B875-200043 506 711AS-BDAP-218AS-B881-001AS-B873-001ADU216A020-Plus140CPS21400110144AM-SA85-000170BDI34600CRA 932 007628-200596.08557VCM74210AS-BADU-205MEF002BKF112

VME-3122A

VME Analog I/O Input Boards

Overview

High-Performance 16-bit Analog-to-Digital Converter (ADC)

AS-E60-BAS-884A-211120-082-005TXT122AS-P890-000AS-J892-101PC-Z984-785100-265-8166051-042.23966MEF004100-304520VPU192007628-042.244800AS-9508-000AS-B872-200MPV 003 203608AS-MEEP-000AS-B883-01170-BDM-344-00KP1-C05 SEAB6065-042.244724120-147-005140 DDO8430092-00838-03

Three scan modes

Three trigger modes

Continually digitizes selected input channels and stores the results

Program-selectable scanning of 1, 8, 16, 32, 48, or 64 channels

Software-selectable conversion rate (100 kHz maximum)

16-bit A/D conversion

64 differential or single-ended inputs

VME-3122BVME-3122B High-Performance 16-bit Analog-to-Digital Converter (ADC)

SpecificationsChannel Voltage Ranges0-5V, 0-10V, ±2.5V, ±5V, ±10VChannels64Form FactorVMEFunction16-bit ADCThroughput100 kHz

VME Analog I/O Input Boards

Overview

High-Performance 16-bit Analog-to-Digital Converter (ADC)

• Three scan modes
• Three trigger modes
• Continually digitizes selected input channels and stores the results
• Program-selectable scanning of 1, 8, 16, 32, 48, or 64 channels
• Software-selectable conversion rate (100 kHz maximum)
• 16-bit A/D conversion
• 64 differential or single-ended inputs
• VME-3122BVME-3122B High-Performance 16-bit Analog-to-Digital Converter (ADC)
• SpecificationsChannel Voltage Ranges0-5V, 0-10V, ±2.5V, ±5V, ±10VChannels64Form FactorVMEFunction16-bit ADCThroughput100 kHz
• AS-E60-BAS-884A-211120-082-005TXT122AS-P890-000AS-J892-101PC-Z984-785100-265-8166051-042.23966MEF004100-304520VPU192007628-042.244800AS-9508-000AS-B872-200MPV 003 203608AS-MEEP-000AS-B883-01170-BDM-344-00KP1-C05 SEAB6065-042.244724120-147-005140 DDO8430092-00838-03

ACC-BT01

Dual 64-pin Transition Panel

Overview

The ACC-BT01 provides a compact, cost-effective transition between field wiring and Abaco Systems Embedded System I/O boards. Lift clamp-style terminal blocks are provided for attachment of field wiring, while two 64-pin DIN connectors are provided for connection to I/O boards.

Specifications

Form Factor

Other

Other

Dual 64-pin Transition Panel

ACC-BT01

ACC-BT01

VMIACC-BT12

D-Subminiature Adapter Shell for 9-, 15-, and 25-pin Connectors

Overview

The ACC-BT12 D-subminiature adapter shell provides a high-density, D-subminiature connector to two-level terminal transition in an easy-to use form factor. The ACC-BT12 simplifies field wiring interfaces by providing convenient lift clamp-style terminals. The ACC-BT12 does not require DIN-rail mounting and can provide the D-sub to terminal block interface in a very small space.

• Provides easy-to-use lift clamp terminal blocks
• Accepts 26 to 14 AWG
• IEC 807-2DIN 41 652 or MIL-C-24 308 compliant
• Interconnects field wiring with Abaco Systems I/O boards

VMIACC-BT12

• ALUMINIUM152
  AM-C916-100
  A332-03
  7628-000249627
  43506698
  170BAM09600
  92-00688-01
  110-CPU-612-03
  PC-E984-265
  NW-BP85-002
  AS-B875-011
  410-3/S908
  S31N-R00-F010
  AS-H810-1208
  AS-BDAP-208
  7428-042-24809
  MM-PMC1-200
  AS-BDEP-216
  110 CPU 411 03
  3185996
  MMPMC1200

VME-5504L

D32/A16 RS-485 VMEbus Repeater Lin

Overview

The VME-5504L is designed to use a single master repeater board which may be connected to as many as 16 slave repeater boards using a single pair of cable assemblies with cable taps. This configuration allows VMEbus slave I/O boards residing in one VMEbus chassis to be controlled by a VMEbus master residing in another chassis. The VMEbus chassis in which VMEbus masters reside is referred to as a master chassis, while the VMEbus slave boards reside in a slave chassis (no master in slave chassis).

• Supports up to 16 slave-only chassis per master
• DIN-type I/O connectors
• Double Eurocard form factor
• Link includes one master board, one slave board, and a wide variety of cable length options
• Supports 16-bit addressing
• Supports 8-, 16-, and 32-bit data transfers
• Supports the configuration of large I/O systems
• Supports up to 1,000-ft cables
• Differential line drivers and receivers provide ±7 V common-mode noise rejection
• Multidrop capability reduces cost
• Software transparent link
• Slave chassis is placed in reset if master chassis is powered down or cables are disconnected

Specifications

Addressing:  16

Data Transfer Bits

8, 16, 32

Distance

5 to 1,000 ft

Form Factor

VME

Link Cable

Wire, Flat Cable

Other

VMEbus Repeater Link

Newer

VME-5504L

D32/A16 RS-485 VMEbus Repeater Lin

Overview

The VME-5504L is designed to use a single master repeater board which may be connected to as many as 16 slave repeater boards using a single pair of cable assemblies with cable taps. This configuration allows VMEbus slave I/O boards residing in one VMEbus chassis to be controlled by a VMEbus master residing in another chassis. The VMEbus chassis in which VMEbus masters reside is referred to as a master chassis, while the VMEbus slave boards reside in a slave chassis (no master in slave chassis).

• Supports up to 16 slave-only chassis per master
• DIN-type I/O connectors
• Double Eurocard form factor
• Link includes one master board, one slave board, and a wide variety of cable length options
• Supports 16-bit addressing
• Supports 8-, 16-, and 32-bit data transfers
• Supports the configuration of large I/O systems
• Supports up to 1,000-ft cables
• Differential line drivers and receivers provide ±7 V common-mode noise rejection
• Multidrop capability reduces cost
• Software transparent link
• Slave chassis is placed in reset if master chassis is powered down or cables are disconnected

Specifications

Addressing:  16

Data Transfer Bits

8, 16, 32

Distance

5 to 1,000 ft

Form Factor

VME

Link Cable

Wire, Flat Cable

Other

VMEbus Repeater Link

VME-4145

VME-4145 4-Channel 16-bit Arbitrary Waveform Generator

Overview

The VME-4145 Analog Output Board provides four high-quality analog output channels with 16-bit resolution. Each output has a dedicated D/A Converter (DAC), and can source or sink 10 mA at ±10 V. The analog outputs can be disconnected from the field wiring for off-line testing. Autocalibration and self-test are initiated by a VMEbus system reset or by execution of a software command.

Continuous, single burst, or burst/idle/burst waveform generation modes of operation

Autocalibration of all channels

Four-channel analog waveform generator

One 16-bit D/A converter per output

Specifications

Channel Voltage Ranges

0-5V, 0-10V, ±2.5V, ±5V, ±10V

Channels

4

Form Factor

VME

Function

16-bit DAC

Throughput

400 nS

VME-4150

VME-4150 Analog I/O Output Boards

Overview

The VME-4150 provides 12 isolated high quality 12-bit analog output channels on a single 6U form factor VMEbus board. Each channel is electrically isolated from all other channels and from the VMEbus.

• Static readback data registers simplify program control
• Optical data coupling provides full galvanic isolation
• 4-, 8-, and 12-channel configurations
• 0.05 percent accuracy for voltage outputs, 0.08 percent for current loop outputs
• Available with 4 to 20 mA current outputs
• 10 mA load capacity for voltage outputs over full +/-10 V range
• 12-bit resolution
• 12 fully isolated analog outputs
• Up to 1,500 VDC isolation, channel-to-channel and channel-to-bus (1,000 VDC standard)
• Voltage output ranges selectable as +/-2.5, +/-5, or +/-10 V
• Front panel acces
• 

Specifications

Channel Voltage Ranges

4-20, 0-20, 5-25 mA

Channels

4, 8, 12

Form Factor

VME

Function

12-bit DAC

Throughput

DC to 1 kHz

VME-4150

6051-042
CGD21-TB
MBP-30
PC-0984-485
110CPU51202
AS-B814-108
92-01887-02
MM-08MP-001
DR-1060-305
AS-S985-022
AS-B882-239
140ARI03010
S61G-A00-F0V0