Process Gas Chromatographs PGC5007 Total sulfur analyzer

The PGC5007 performs a Total sulfur analysis for a range of streams, liquid and vapor, from natural gas to gasoline and diesel.

A fixed volume of sample from the process stream is injected via a sample inject valve. Air transports the sample into the furnace, where it oxidizes the sample to carbon dioxide, water and sulfur dioxide. These components are separated using packed columns and pass into the Flame Photometric Detector (FPD), where the trace levels of Total Sulfur are measured.

Total sulfur solutions

A fixed volume of sample from the process stream is injected via a sample inject valve. Air transports the sample into the furnace, where it oxidizes the sample to carbon dioxide, water, and sulfur dioxide. These components are separated using packed columns and pass into the FPD, where the trace levels of Total Sulfur are measured.

A designation was assigned to the ABB On-line sulfur in fuel gas chromatograph (PGC2007) – ASTM Method D7041-04. The PGC2007 has now been updated to the PGC5000 Series PGC5007B Total Sulfur Analyzer.

This method provides industry the only on-line method with precision and bias data that is 2-5 times better than all other sulfur methods on the books. This is the only method to date that meets the requirements for low range (0-15 ppm) diesel compliance measurements.

ASTM 7041-04. “Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection,” ASTM International

Process Gas Chromatographs PGC5000C Smart oven

ABB process gas chromatograph portfolio includes specialty gas chromatographs (process simulated distillation, temperature programmed, fast temperature programmed and total sulfur).

The PGC5000 Series has been designed for distributed control across multiple analytical Smart Ovens™ for limitless application approaches. There are two ovens, PGC5000B and PGC5000C, suitably equipped for the type of application engineered.

Features of PGC5000C Smart Oven

Appropriately sized (28% larger) and designed for maximum application densification

Perfect for multiplexing multiple streams’ analyses in a single analytical oven

Designed for complex application measurements

Multiple detector configuration – sTCD, mTCD, FID and FPD capability

Process Gas Chromatographs PGC5000B Smart Oven

ABB process gas chromatographs perform real-time analysis of the chemical composition of a process sample or stream – crucial for on-spec processes and productivity.  PGC5000B Smart Ovens target simple applications with a fixed set of features.

The PGC5000 Series has been designed for distributed control across multiple analytical Smart Ovens for limitless application approaches. There are two ovens, PGC5000B and PGC5000C, suitably equipped for the type of application engineered.

Features of PGC5000B Smart Oven

Correctly sized and designed for simple configurations and maximum reliability

Designed for mission critical measurements

Standard detector configuration – sTCD, mTCD, FID and FPD capability

Smaller footprint allows for shelter size and utility reduction

Process Gas Chromatographs PGC5000A Generation 2 Master Controller

The PGC5000A Generation 2 Master Controller provides all of the analyzer system control functions and coordinates internal and external data activities for the PGC5000B, PGC5000C, PGC5007 and PGC5009 Smart Ovens™.  Analyzer and the control systems communicate via intrinsically safe (IS) Fiber Optic with Redundant Ethernet, Modbus or Modbus RTU

Features of PGC5000A

10” SVGA touch screen with multi-touch control supports the HMI

Simple tab layout for ease-of-use

Universal touchscreen

Intrinsically safe fiber optic connections to multiple Smart Ovens

Redundant Ethernet ports for guaranteed data transfers

Standard USB ports for convenient system updates

Direct MODBUS communication

Comprehensive I/O options

Are you looking for support or purchase information?

Contact us

The PGC5000A Generation 2 Master Controller with new Graphical Driven HMI offers a fully functional touchscreen. Developing, editing and storing analysis methods are now easy. Programming is now a thing of the past. Just “point and click”  is all that is required to access any of the analyzer functions. All of the major analyzer functions are identified on tabs making it easy to know where to go to access information when needed.

PGC5000 Integrated controller

The PGC5000 Integrated Controller combines the core functionality of the PGC5000A Master Controller into either the PGC5000B or PGC5000C Smart Oven.

Features:

The end users can use the existing network available in the shelters to communicate with the process gas chromatographs, using either a standard PC, industrial tablet or Master Controller.

Wireless communication by adding a wireless access point device, i.e: MOXA device

Benefits:

Cost savings (SIUs, EPCs and End Users)

– Reduces shelter footprint

– Reduces HVAC capacity

– Optimizes oven installation

Reduce analyzer costs

Process Gas Chromatograph PGC1000

The PGC1000 addresses a specific niche in the process industry market where customers seek analytical measurement solutions that are simple, highly accurate, cost-effective (requiring no shelter), modular and have very low maintenance and implementation requirements.

The PGC1000 is a field-mount gas chromatograph (GC) capable of measurements of C1 through C9+, inerts and H2S in various Hydrocarbon Processing Industry (HPI) streams. This analyzer is perfect for measuring light hydrocarbon gases in locations where minimal space is available. The PGC1000 is an excellent choice for most gas processing industry applications and for monitoring fuel gases such as natural gas, synthetic gas, methane and / or bio-gas to ensure optimal plant operations.

Features of PGC1000

Compact footprint – 16 inches, front to back, 28 pounds

Conventional analytical components, not a GC on a chip

Windows CE® operating system

Interactive, graphical display actuated by magnet contact

Reid vapor pressure analyzers RVP4500 Series

Increase your gasoline blending profits with process Reid Vapor Pressure measurements and automatic air saturation of the sample

Overview

The RVP4500 series accurately measures Reid Vapor Pressure throughout the gasoline range and its feedstocks. It offers a simple, reliable, compact, single cell design that requires minimal operator interface, minimal maintenance with no moving part and is factory pre-calibrated. It validates every analysis with self-diagnostics.

Thanks to the novel airsat module presence in the RVP4550 model, final gasoline blending operations can now replicate the manual air saturation step of the standard ASTM D323 laboratory method, offering reduced validation uncertainties.

RVP4500 series models

RVP4500 0-20 psi – Gasoline

RVP4550 0-20 psi – Gasoline with airsat

RVP4503 0-30 psi – Gasoline

RVP4501 0-90 psi – Gasoline

RVP4510 0-25 psi – Shale Oil

RVP4540 0-225 psi – LPG, NGL

General Description

Single cell design

Approximate cycle time 7.5 minutes

Measurement range – 0 – 20 psi

Low sample volume – 2.5 ml

Explosion proof

Repeatable, reproducible, and accurate

Require minimal operator interface

Instrument checks operation via self-diagnostics

Small compact design

Color analyzer

Aztec AW637

Improve drinking water quality and minimize chemical coagulant usage

The Aztec 600 color analyzer has been designed specifically for the measurement of water color through the drinking water treatment process for coagulation optimization.

Overview

The Aztec 600 on-line color monitor provides water treatment operators with a cost-effective tool for quick and accurate assessment of treatment performance in real time

Featuring ABB’s intuitive menu-driven software and the unique self-cleaning Aztec fluid handling system, users benefit from an analyser that is both simple-to-operate and maintain.

Users benefit from:

– Analysis of up to 3 sample streams

– Automatic 2-point calibration

– Self-cleaning measurement system

– Intuitive software with full colour graphical display

– Data logging and graphical process trending

– Full audit trail capability

– Secure data archiving to SD Card

UviTec BOD/COD Field Meter

The portable UviTec BOD/COD Field Meter provides simple and affordable testing of organic matter in water or wastewater output as biochemical oxygen demand (BOD) or chemical oxygen demand (COD). Operation is straight forward with accurate and repeatable results obtained in seconds. An optional Battery Pack allows for sampling anywhere, anytime giving the user true portability.

Features & Benefits

• Simple and affordable BOD/COD testing
• Easy to use with fast 90 second warm up time
• Accurate and precise results within seconds
• Patented technology provides superior measurement performance
• No zeroing to DI water before each test
• Long lasting UV and visible LEDs
• Rugged for field testing with optional Battery Pack
• No reagents required
• 
• OverviewGeneral Specifications:CharacteristicsTechnical data Path Length Options 2 mm, 10 mm Parameters BOD, COD Units mg/L Calibration Calibration memory prevents the need to re-zero to DI water Self-Diagnostic Notification of system failure Display 4 line x 20 character backlit LCD Wavelengths Multiple wavelengths Light Source UV LED Dimensions 8.7″L x 7.5″W x 3.9″H Enclosure Rugged, compact, watertight, and dustproof Electrical 12VDC 1A wall adapter (accepts 90-250VAC 50/60Hz), 12VDC car adapter Storage Temp -20 to 60°C (-4 to 140°F) Operating Temp 0 to 45°C (32 to 113°F) Weight 4 lbs Technology Split-Sense Warranty 2-year limited warranty

Ammonia analyzer

Aztec AW632

Accurate low level ammonia analysis

The Aztec 600 colorimetric ammonia analyzer provides reliable and highly accurate measurement of low level ammonia concentrations for a wide variety of applications from drinking water influent to wastewater effluent.

Overview

It’s never been easier to accurately monitor low levels of ammonia online.

Featuring ABB’s intuitive menu-driven software and the unique self-cleaning Aztec fluid handling system, users benefit from an analyser that is both simple-to-operate and maintain.

Users benefit from:

– Analysis of up to 3 sample streams

– Automatic 2-point calibration

– Automatic background color compensation

– Automatic sample dilution to maximize range

– Self-cleaning measurement system

– Intuitive software with full colour graphical display

– Data logging and graphical process trending

– Full audit trail capability

– Secure data archiving to SD Card

Ammonia analyzer

Aztec AAM631

Providing continuous ammonia analysis for optimization of nutrient removal

The Aztec 600 ISE ammonia analyzer provides reliable and accurate measurement of ammonia concentrations for a wide variety of applications including source water monitoring and wastewater nutrient removal.

Overview

The Aztec 600 ISE ammonia analyzer uses a robust gas sensing ammonia electrode to provide accurate and reliable continuous measurement of the total ammonia nitrogen (TAN) concentration, that is the sum of the gas NH3 and the cation NH4+.

Featuring ABB’s intuitive menu-driven software and the robust ISE sensing system with automatic calibration, users benefit from an analyzer that is both simple-to-operate and maintain.

Users benefits from:

– Continuous measurement using ISE technology

– Automatic 2-point calibration

– Buffered measurement for maximum accuracy

– Low reagent consumption (up to 3 months continuous measurement before reagent replenishment)

– Temperature-controlled flowcell for measurement stability

– Intuitive software with full colour graphical display

– Data logging and graphical process trending

– Full audit trail capability

– Secure data archiving to SD Card