General Information
Product ID:3BHE023784R2330
ABB Type Designation:-
Catalog Description:PP D113 B01-23-111000: AC 800PEC
Long Description:
Containing:
Slot ANYIO-1 (U4) CEX2-Bus RS422
Slot ANYIO-2 (U5) Anybus-S/Profibus
Slot Opt. Mod.1 (U7) UF D128
Slot Opt. Mod.2 (U8) UF D128
Slot Opt. Mod.3 (U9) UF D128
Slot Opt. Mod.4 (U10) empty
Slot Opt. Mod.5 (U11) empty
Slot Opt. Mod.6 (U12) empty
Series overview
ABB Relion® 605 series is a protective relay product family specially designed for distribution network, which represents the technical benchmark in the field of low and medium voltage power system protection. Based on ABB’s decades of experience in the field of power protection, this series integrates the latest digital signal processing technology and network communication capabilities, and provides a complete solution for substation automation.
Series core value
Modular design: allows users to select functional combinations according to specific application requirements.
Compact structure: Optimized space utilization, especially suitable for renovation projects.
Intuitive operation: simplified man-machine interface lowers the threshold of use
Network integration: supporting modern substation communication standards
Product line composition
Series 605 contains several special protection relay models, each with its own characteristics:
1. REF601
Feeder protection and control relay
Integrate protection, monitoring and control functions into one.
Including circuit breaker control function.
Support automatic reclosing (up to 4 times)
2. REJ601
Overcurrent protection relay
Focus on overcurrent and ground fault protection
Circuit breaker control function is not included.
Three configurations are available (B/C/D)
3. REM601
Motor protection relay
Optimized for motor protection
Including start-up monitoring and thermal model.
Support a variety of motor starting modes.
4. RET615
Transformer differential protection relay
Adopt advanced differential protection algorithm.
Including inrush current suppression function.
Support multi-winding transformer protection
Technical architecture
1. Hardware platform
Processor system: 32-bit DSP+ARM dual-core architecture.
Sampling system: 16-bit ADC, sampling at 64 points per cycle.
Power supply design: wide range input (24-250V AC/DC)
Mechanical structure: 1/2 frame width, front wiring design.
General Information
Product ID:3BHE023784R2530
ABB Type Designation:-
Catalog Description:PP D113 B01-25-111000: AC 800PEC
Long Description:
Containing:
Slot ANYIO-1 (U4) CEX2-Bus RS422
Slot ANYIO-2 (U5) Anybus/Modbus TCP
Slot Opt. Mod.1 (U7) UF D128
Slot Opt. Mod.2 (U8) UF D128
Slot Opt. Mod.3 (U9) UF D128
Slot Opt. Mod.4 (U10) empty
Slot Opt. Mod.5 (U11) empty
Slot Opt. Mod.6 (U12) empty
Additional Information
ABB Type Designation:-
Country or Territory of Origin:Switzerland China
Frame Size:Undefined
Gross Weight:4.2 kg
Invoice Description:PP D113 B01-25-111000: AC 800PEC
General Information
Product ID:3BSE092980R1
ABB Type Designation:PP886
Catalog Description:PP886 Standard Panel 15″
Long Description:1280×800 widescreen (16:10). Requires Panel Builder 800 Version 6.2 for configuration.
To protect the front, it’s recommended to use the RX886 Touch cover.
Replaces PP885.
Additional Information
Medium Description:1280×800 widescreen (16:10). Requires Panel Builder 800 Version 6.2 for configuration.
To protect the front, it’s recommended to use the RX886 Touch cover.Replaces PP885.
Product Type:Control_System_Accessory
DESCRIPTION OF HARDWARE
Complete system
An RE. 216 protection system comprises at least an electronic equipment rack Type 216MB62 with the electronic modules in serted (plug-in units) and a number of I/O units, which are in ef fect the interface with the primary plant. The protection system is available as a cubicle version or as a compact version.
shows an example of a 216MB61 equipment rack installed in the hinged frame of a protection cubicle. The elec tronic modules are designed as plug-in units, which are inserted from the front. The B448C parallel bus provides communication between the electronic units and is fitted to the rear of the rack. Also situated at the rear are the connectors for the standard ca bles to the I/O units and for connecting a printer.
The input transformer, auxiliary relay I/O and tripping relay units are mounted on the inside of the rear panel of the protection cubicle。
The number and type of electronic units installed, their locations in a rack, the number of racks and the number and arrangement of I/O units varies from plant to plant.
Refer to the corresponding set of diagrams for the execution of an RE. 216 system for a particular plant.
A compact version of the REG 216 protection is also available, which is basically a standardised equipment rack (see Section 2.3.). The compact version can be mounted either in an open frame or in a cubicle with other equipment.
Functions
REF542plus Multifunction Protection and Switchbay Control Unit integrates all the secondary functions in a single unit. This multifunctional unit also features a self monitoring function. All functions are designed as freely configurable software modules. Therefore, a wide range of operation requirements in MV stations can be met without any problems. The versatility of the software makes it possible to use the REF542plus on every switchboard independent on the specific application required.
Configuration
Each application for protection and control can easily be configured by software function modules, which make arbitrary definition of the following features as part of the secondary system possible:
LED’s (meaning and colors) for local indication
Single Line diagram to show the status of switching devices
Protection schemes
Control schemes
Interlocking schemes
Automation sequences
All functions in the switchbay can be specified in collaboration with ABB. The result of the configuration is saved and delivered together with the switchboard to the users. By using the “FUnctional block” Programming LAnguage (FUPLA) the REF542plus Multifunction Protection and Switchbay Control Unit offers engineers, especially those who are not software experts, the opportunity of easily updating the operation and handling of the switchbay.
General Information
Product ID:57120001-EY
ABB Type Designation:DSAO 120
Catalog Description:Analog Output Board
General Information
Product ID:1VCF750090804
ABB Type Designation:Certification Level 1
Catalog Description:HMI SUE 3000 (110…220 V)
Long Description:HMI SUE 3000 (110…220 V)
Additional Information
ABB Type Designation:Certification Level 1
Frame Size:Spare_Parts
Gross Volume:0 m³
Gross Weight:0.75 kg
Invoice Description:HMI SUE 3000 (110…220 V)
Made To Order:No
Minimum Order Quantity:1 piece
Order Multiple:1 piece
Package Level 1 Gross Weight:0.75 kg
Package Level 1 Units:1 piece
Part Type:New
Product Name:HMI SUE 3000 (110…220 V)
Product Net Weight:0.75 kg
ABBAO2040
ABB REF615C-E HCFFAEAGABC2BAA11E
ABB DYTP600A 61430001-ZY
ABB CI873K01 3BSE058899R1
ABB PPD517A3011 3BHE041576R3011
ABB UNITROL1010 3BHE035301R0001 UNS0121A-Z.V1
ABB PM510V08 3BSE00B373R1
ABB CI543
ABB SDCS-CON-2-COAAT 3ADT220090R2
PFRL101
For measuring web tension with shaft-mounted load cells, The Pressductor Radial Load Cell System is a high-quality system that provides exceptional and long lasting performance.
The Pressductor Radial Load Cells are ideal for applications on a wide range of web processing machinery in the converting, plastic film, printing, textiles, and other industries.
Data
Nominal load
(rated capacity) kN 0.5 1.0
Lbs. 112 225
Extended load kN 0.75 1.5
Lbs. 169 337
PFEA 111, 112, 122 and 113
– bringing something new to web tension
Covering a wide range of applications the Tension Electronics comes in four versions, with different levels of performance and functionality. All four versions have multi-language digital display and configuration keys. The configuration keys being used for setting different parameters and to check the status of the tension system.
The 2 x 16 character display can present sum, difference or individual load cell signals.
All four versions are available in both DIN-rail version and enclosed IP65 (NEMA 4) version for mounting in more severe environments.
Type PFEA111 PFEA112 PFEA122 PFEA113
