Tag: ABB

ABB Relion® 605 series is a protective relay product family specially designed for distribution network, which represents the technical benchmark in the field of low and medium voltage power system protection. Based on ABB’s decades of experience in the field of power protection, this series integrates the latest digital signal processing technology and network communication capabilities, and provides a complete solution for substation automation.

Series core value
Modular design: allows users to select functional combinations according to specific application requirements.
Compact structure: Optimized space utilization, especially suitable for renovation projects.
Intuitive operation: simplified man-machine interface lowers the threshold of use
Network integration: supporting modern substation communication standards
Product line composition
Series 605 contains several special protection relay models, each with its own characteristics:

1. REF601
   Feeder protection and control relay
   Integrate protection, monitoring and control functions into one.
   Including circuit breaker control function.
   Support automatic reclosing (up to 4 times)
2. REJ601
   Overcurrent protection relay
   Focus on overcurrent and ground fault protection
   Circuit breaker control function is not included.
   Three configurations are available (B/C/D)
3. REM601
   Motor protection relay
   Optimized for motor protection
   Including start-up monitoring and thermal model.
   Support a variety of motor starting modes.
4. RET615
   Transformer differential protection relay
   Adopt advanced differential protection algorithm.
   Including inrush current suppression function.
   Support multi-winding transformer protection
   Technical architecture
5. Hardware platform
   Processor system: 32-bit DSP+ARM dual-core architecture.
   Sampling system: 16-bit ADC, sampling at 64 points per cycle.
   Power supply design: wide range input (24-250V AC/DC)
   Mechanical structure: 1/2 frame width, front wiring design.

SM560-S (1SAP280000R0001) is a high-performance CPU module in ABB AC500 programmable logic controller (PLC) series, equipped with the firmware version of SM560-S-FD-4. This CPU is designed for medium-sized automation applications, providing powerful processing power and flexible expansion options.

Core product identification
Product model: SM560-S
Order number: 1SAP280000R0001
Firmware version: SM560-S-FD-4
Product series: AC500 PLC
Manufacturer: ABB
technical specifications

1. Processing performance
   Processor type: high-performance industrial-grade processor
   Execution speed: typically 0.1ms/1000 instructions (depending on firmware version and program complexity)
   Memory capacity:
   Working memory: the typical configuration is several MB (the specific capacity needs to be confirmed)
   Retention memory: used to store key data.

General Information

Product ID:769137

ABB Type Designation:-

Catalog Description:Detector 13CO2 10% (Uras26)

Additional Information

ABB Type Designation:-

Consumption Information:recommended part

Country or Territory of Origin:GermanyUnited States

Customs Tariff Number:90279000

Frame Size:Spare_Parts

Gross Volume:0.22 dm³

Gross Weight:0.25 kg

Invoice Description:Detector 13CO2 10% (Uras26)

Made To Order:No

Minimum Order Quantity:1 piece

Order Multiple:1 piece

Package Level 1 Depth / Length:11 cm

Package Level 1 Gross Weight:0.25 kg

General Information
Product ID:0002-07-2-00001-01
ABB Type Designation:BMXS
Catalog Description:BMXS Science Module (ADC)
Long Description:BMXS Science Module (ADC)

Additional Information
ABB Type Designation:BMXS
Frame Size:Spare_Parts
Gross Weight:0.07 kg
Invoice Description:BMXS Science Module (ADC)
Made To Order:No
Minimum Order Quantity:1 EA
Part Type:New
Product Name:BMXS Science Module (ADC)
Product Net Weight:0.07 kg

1 Safety instructions

cial environmental conditions must be observed (e.g., hazardous areas due to explosive sub stances, heavy soiling or corrosive influences). The devices must be handled and operated within the specified technical data and system data. The devices contain no serviceable parts and must not be opened. Removable covers must be closed during operation unless otherwise specified. Any liability for the consequences of incorrect use or unauthorized repairs is rejected.

Qualified per sonnel

Both the AC500 control system and other components in the vicinity are operated with dan gerous touch voltages. Touching live components can lead to serious health implications or even death. To avoid such risks and the occurrence of property damage, persons involved in the installation, commissioning and maintenance must have relevant knowledge about the following: 

 ● Automation technology 

 ● Handling of hazardous voltages 

 ● Application of relevant standards and regulations, accident prevention regulations and reg ulations on special environmental conditions (e.g., hazardous areas due to explosive sub stances, heavy soiling or corrosive influences)

Functional safety

The AC500-S safety user manual must be read and understood before using the safety configu ration and programming tools of Automation Builder/PS501 Control Builder Plus. Only qualified personnel are permitted to work with AC500-S safety PLCs. AC500-S safety user manual

General infor mation

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variants and requirements associated with any particular installation, ABB cannot assume responsibility or liability for actual use based on the examples and diagrams. The PLC was developed according to the relevant standards. Any module-specific measures are described in the individual descriptions of the modules.

The product family AC500 control system is designed according to the EN 61131-2 and IEC 61131-2 standards. Any data that differs from IEC 61131-2, is due to the higher requirements of Maritime Services. Other differences are described in the technical data description of the devices

NOTICE! Avoidance of electrostatic charging PLC devices and equipment are sensitive to electrostatic discharge, which can cause internal damage and affect normal operation. Observe the following rules when handling the system:– Touch a grounded object to discharge potential static.– Wear an approved grounding wrist strap.– Do not touch connectors or pins on component boards.– Do not touch circuit components inside the equipment.– If available, use a static-safe workstation.– When not in use, store the equipment in appropriate static-safe packaging.

The AI830/AI830A RTD Input Module has 8 channels for measurement of temperature with resistive elements (RTDs). With 3-wire connections. All the RTDs must be isolated from ground.

The AI830/AI830A can be used with Pt100, Cu10, Ni100, Ni120 or resistive sensors. Linearization and conversion of the temperature to Centigrade or Fahrenheit is performed on the module.

Every channel can be individually configured. The MainsFreq parameter is used to set mains frequency filter cycle time. This will give a notch filter at the frequency specified (50 Hz or 60 Hz). 

Features and benefits

• 8 channels for RTD (Pt100, Cu10, Ni100 and Ni120 and resistor) inputs
• 3-wire connection to RTDs
• 14 Bit resolution
• Inputs are monitored for open-circuit, shortcircuit and has a input grounded sensor

UFC911B108 (product number 3BHE037864R0108) is an industrial automation control equipment produced by ABB company, which is a part of ABB industrial control system product line.

Product identification information
Product model: UFC911B108
ABB product number: 3BHE037864R0108
Manufacturer: ABB
Technical characteristic analysis

1. Product types and applications
   According to the model naming rules analysis:

The prefix “UFC” usually indicates ABB’s universal function card or control unit.
The “911” series may refer to a specific function or performance level.
The suffix “B108” may indicate a version or configuration variation.

2. Typical application fields
   This product may be used in:

Industrial process control system
Electric power automation system
Distributed control system (DCS)
Programmable logic controller (PLC) system

General Information

Global Commercial Alias:PM556-TP-ETH

Product ID:3ABD00034186

ABB Type Designation:PM556-TP-ETH

Catalog Description:PM556-TP-ETH; PLC-eCo CPU PM556-TP-ETH

Long Description:PM556-TP-ETH:AC500,Prog.Logic Controller,512kB,8DI/6DO-T,ETH,24VDC,1xRS485,2xOption Slot

Ordering

Invoice Description:PLC-eCo CPU PM556-TP-ETH

Made To Order:No

Minimum Order Quantity:1 piece

Order Multiple:1 piece

Selling Unit of Measure:piece

Replacement Product ID (NEW):1SAP121200R0071

Dimensions

Product Net Weight:0.35 kg

Product Net Depth / Length:74 mm

Product Net Height:135 mm

Product Net Width:82 mm

Gross Weight:0.51 kg

Package Level 1 Units:1 carton

ABB’s I/O remote units ICSI08D1 and ICSF08D1 CS31 series are important components in industrial automation control system, belonging to Procontic series products. These modules are designed for distributed control systems and provide reliable signal acquisition and output functions.

Core parameters of ICSI08D1 I/O module
Product ID: FPR3315101R1012
ABB type identification: ICSI 08 D1 24V
Product type: I/O module
Physical dimensions: 125mm (length) ×104mm (width) ×80mm (height).
Weight: net weight 0.2kg, gross weight 0.2kg.
Power requirements: 24V DC
Customs tariff number: 85371091
UNSPSC code: 39120000
Minimum order quantity: 1 piece
Sales unit: pieces
Characteristics of ICSF08D1 CS31 series
Product id: FPR 3323101R1012-L.
Series: Procontic CS31
Application field: industrial automation control system
System classification: PLC automation → traditional products →AC31 and early series →AC31 I/O and early series.

GRBTU
LDGRB-01
TB850
cRBX01 2VAA008424R1
PFTL101A 3BSE004166R1
PFTL101A 0.5KN 3BSE004160R1
1MRK002247-Apr04
BSD0750
AI04
129740-002
KOFA12D2
UNITROL 1020
EK150-40-11
A9-30-10
PE1315A
2GCA289005A0050
MR7557891MRS050640C
2RCA013655A0001H
TU810V1
TU841 3BSE020848R1
07CR41
WMDOLT2-A75(65KA)6E 1TGE106812P0001
Uras26 F-No. 3.346368.0 A-No 0240462201/2030
AO845A-eA
ICSF08D1 24V DC
PM556-TP-ETH
ICSF08D1 FPR3323101R1012 24VDC
07KT94-98

MNS iS Design & Components
Withdrawable Module Design
MStart and MFeed modules of withdrawable design provide a maximum of plant and operator safety. As per definition in IEC 61439-1/-2 withdrawable modules can be electrically disconnected (“withdrawn”) without the help of a specific tool with respect to the main incoming circuit, the main outgoing circuit as well as the auxiliary circuits. MStart and MFeed are standardized components, ready-to-use and offered for a wide application range leading to maximum flexibility. The high device packing density allows a comparatively low footprint of the MCC.

Main Characteristics

• Multi-functional operating handle connecting to module interlocking mechanism (see page 44)
• Ergonomic module handle to withdraw the module
• Status display (4 LED) integrated in module front
• Module rear wall with integrated contact system and sensors
• Control terminal block
  MStart and MFeed comprise the power circuit and measurement functionality, thus they are decoupled from integrated control. Integrated control and protection functionality is performed by the allocated MControl located in the control cable compartment. Utilisation of conventional feeder modules for energy distribution is possible for conventional control instead of MControl functionality.

GRBTU
LDGRB-01
TB850
cRBX01 2VAA008424R1
PFTL101A 3BSE004166R1
PFTL101A 0.5KN 3BSE004160R1
1MRK002247-Apr04
BSD0750
AI04
129740-002
KOFA12D2
UNITROL 1020
EK150-40-11
A9-30-10
PE1315A
2GCA289005A0050
MR7557891MRS050640C
2RCA013655A0001H
TU810V1
TU841 3BSE020848R1
07CR41
WMDOLT2-A75(65KA)6E 1TGE106812P0001
Uras26 F-No. 3.346368.0 A-No 0240462201/2030
AO845A-eA
ICSF08D1 24V DC
PM556-TP-ETH
ICSF08D1 FPR3323101R1012 24VDC
07KT94-98
UFC911B108 3BHE037864R0108
AI830A
2RCA013892A0003H