Tag: Kongsberg

The Kongsberg MRU-M-SU1 (often referred to as the MRU S) is a high-precision Motion Reference Unit specifically engineered for marine applications that require real-time compensation for vessel movement.

While it belongs to the broader “MRU” family used in Dynamic Positioning (DP), it is most commonly integrated with fish-finding sonars, multibeam echosounders, and hydrographic survey equipment to stabilize the display and data during rough sea conditions.1

Technical Specifications

The MRU-M-SU1 (MRU S) utilizes solid-state MEMS (Micro-Electro-Mechanical Systems) technology, meaning it has no moving parts and requires no scheduled mechanical maintenance.2

Feature    Specification

Model    MRU-M-SU1 (Part of the MRU S series)

Roll & Pitch Accuracy    0.1° RMS (Dynamic)

Heave Accuracy    5 cm or 5% (whichever is highest)

Angular Orientation Range    $\pm 45^\circ$

Output Data Rate    Up to 200 Hz

Interfaces    Ethernet (TCP/IP, UDP), RS-232. and RS-422

Power Supply    10 to 36 VDC

Housing Material    Anodized Aluminum

Key Capabilities

Motion Compensation: It calculates real-time Roll, Pitch, and Heave.3 This data allows sonar systems to “cancel out” the movement of the boat, ensuring that a school of fish or a seabed feature stays in the same position on the screen even as the boat rocks.

Lever Arm Compensation: The unit can be configured with “lever arms,” allowing it to calculate the exact motion at a remote point (like the sonar transducer head) even if the MRU is mounted elsewhere in the hull.

Solid-State Reliability: Because it uses MEMS sensors rather than traditional mechanical gyros, it is highly resistant to vibration and has a significantly higher MTBF (Mean Time Between Failures).4

Easy Integration: It supports common marine protocols, including NMEA 0183. and can be configured via Kongsberg’s Windows-based “MRC” software.5

Common Use Cases

Fishery Sonars: Vital for high-end sonar systems where wave motion would otherwise cause “smearing” or jumping on the display.6

Hydrographic Surveying: Used with single-beam or multibeam echosounders to correct depth soundings for vessel heave.

Offshore Cranes: Providing heave data to active heave compensation (AHC) systems to keep loads steady during transfer.7

Maintenance & Service Tip

Recalibration: Kongsberg recommends factory recalibration for the MRU S series every 2 years to maintain its specified static accuracy. If your system is reporting a “Sensor Health” warning or if you notice a

RMP2018

DIGITAL INPUT MODULE

RMP420-Remote Multipurpose

Input/Output

RPM420 is a multipurpose I/O module for use in Alarm monitoring and

Integrated Control Systems.  RMP420 is designed for 32 field input channels

in single topologies. Its interface towards the host control computer (RCU) is

provided by redundant I/O bus.

The module is approved for Ex Zone 2 applications.

Functions

• 32 software configurable multipurpose solid-state channels.

• Analog and Digital Input and Output (AI, AO, DI and DO).

• 2 or 3 wire Resistance Temperature Detector (RTD).

• 2 channels can be configured as pulse/frequency/encoder input.

• Short-circuit protected I/O loop power output.

• Dual Remote I/O process BUS interface for redundant communication with

host computer(s).

• Communication ports galvanically insulated from other module circuitry.

• Loop monitoring (per channel)

TECHNICAL DATA

KM Article number RMP420: 306712

Electrical

Input supply voltage: 24 VDC (18-31.2 V)

Power consumption: • Power: 10 W Typical

• Loop power:

Configuration dependable

Power connectors: • Screw terminals

• Cable cross-section:

2.5 mm2

• Max. torque 0.4-0.5 Nm

RBUS interface

RBUS connectors: 2×9 pin male D-Sub,

RS485. galvanic isolated

Input/output

No. of I/O channels: 32

I/O configuration: Multipurpose. Channels

are individually

configured

Digital Input (DI)

Loop voltage: Input supply voltage

Input loop current: Max. 4 mA @ 24 VDC loop

voltage

Channel “Off” current: <0.5 mA

Channel “On” current: >3 mA

Max input voltage: Input supply voltage

Max. input signal freq.: 10 ms pulse

Compliance: Namur compliant, PNP/NPN

compliant

Digital Output (DO)

Loop voltage: Input supply voltage

Loop driver device: Short Circuit Proof High

Side Driver

Loop driver trip current: approx. 1.4 A @ 20˚C

(reset by command)

Loop driver “Off” leakage: Max. 0.1 mA @ 24 VDC

input supply voltage

Loop monitoring current: Max. 2 mA @ 24 VDC input

supply voltage

Analog Input (AI)

Voltage input range: 0-4 V, 0-10 V

Input resistor to ground: 3 MΩ

Current input range: 0-20 mA

Automatic protection: 26 mA

Input resistor to ground: 150 Ω ±1 %

Measurement accuracy: ±0.15% of full scale

PT100 interface

RMP2018

Temp. range:-200 to 600˚C

Resolution: ±0.5˚C

Accuracy: ±0.4% of full scale

Temperature drift: ±50 ppm/˚C

Max. wire resistance: 25 ohm/wire

Response time 1000 ms

Analaog Output (AO)

Voltage output range: 0-10 V ±0.5% (internal

resistance: 1 kohm)

Current output range: 0-20 mA

Minimumlocal resistance: 500 ohm

Measurement accuracy: ±0.35% of full scale

Pulse/Frequency interface

Max. input range: Pulse count freq.:10 kHz

Encoder count Up/Down:

2.5 kHz rev. (4 counts/

revolution)

Duty cycle: Pulse width: min. 11µ @

10 kHz range

Pulse lever transmission: Namur: 1on >2.1 mA, 1off

<1.2 mA. Rin <2.2 kohm,

1max = 3 mA,

Current: 1ohm >9 mA, 1off <7 mA,

Rin <1 kohm, 1max = 13 mA

Accuracy (oscillator): 100 ppm over the whole

temp. range (-15 to

+70˚C) 25 ppm typical @

2˚C

Fail safe

HW Fail safe: Min. 65 ms

Internal Test Error: Instantly set

Soft Fail safe (down

counter):

100 ms – 65 sec. (6 sec.

default)

Compliance • IACS E10

• IEC 60945

• IEC 60355

• IEC/EN60079-0.-7

Type approval Presafe 18ATEX12094X

(II 3G Ex ec IIC T4 Gc)

Environmental specifications

Ambient temp. and humidity:

Temp. operation:-15˚C to +70˚C

Temp. storage:-25˚C to +70˚C

Humidity operation: Up to 98% RH

Humidity storage: Up to 98% RH

Protection standards: IP 20 (IEC 60529)

Mechanical

HxWxD: 355x158x87 mm

Weight: 1.35 kg

DIN rail vertical

mounted: 35 7.5/15

Life cycle prediction

Predicted failure rate @

GB 25˚C (60% confident,

based on chip suppliers

data): 38.5 years

Predicted failure rate @

NS 35˚C (Environmental

derating based on Rome

Laboratory toolkit): 10.4 years

Kongsberg Simrad MOS-33 TFT Midi Operator Station 8200635

Kongsberg Simrad MOS-33 TFT Midi Operator Station, a multipurpose operator station designed for alarm monitoring and process control.

The MOS-33 features a 5.7-inch color TFT display and an integrated keyboard, providing a complete HMI solution in a single unit.

It is built to withstand extreme temperatures, shock, and vibration, making it suitable for installation anywhere on a vessel, from the bridge to the engine room or even on deck.

Technical Specifications

Display: 5.7-inch color TFT, 320 x 240 pixels.

Power: 18-32 VDC.

Operating Temperature: -15°C to +70°C.

Approvals: DNV Class B, IACS E10.

Interface: Integrated keyboard with menu, function, and alphanumeric keys.

Applications & Compatibility

Alarm and process monitoring in space-constrained locations.

Dedicated control panel for specific machinery or remote alarm panel.

Use as a remote operator station in harsh environments (engine rooms, on deck).

The Kongsberg Simrad MOS-33 (Midi Operator Station) is a compact, multipurpose operator panel designed for monitoring and control in maritime environments.

1 It is often used as a remote alarm station or a secondary control interface for systems like K-Chief 600. AutoChief, and Bridge Watch Monitoring Systems (BWMS).2

+1

Unlike larger PC-based operator stations, the MOS-33 is a “midi” unit, meaning it is ruggedized for installation in harsh areas like engine rooms or even out on deck.3

Key Technical Specifications

The MOS-33 integrates both a display and a functional keyboard into a single, compact housing.4

Feature    Details

MOS-33

Model Number    MOS-33 (often identified by P/N 8200635)

Display    5.7″ TFT Color (320 x 240 pixels)

Power Supply    18–32 VDC (Nominal 24 VDC)

Power Consumption    Approx. 10W (can be higher in specific configurations)

Operating Temp    -15°C to +70°C (designed for high-heat environments)

Protection    IP66 (Front) / IP22 (Rear)

Dimensions    252 mm x 144 mm x 70 mm

Functional Design

MOS-33

The front panel is designed for high-visibility alarm management and simple process control through tactile buttons:

Keyboard Layout: Includes 4 dedicated Function keys (F1–F4), a numeric/alphanumeric keypad, and dedicated navigation keys for menu scrolling.5

Alarm Management: Features large, tactile buttons for Acknowledge (ACK) and Sound Off, allowing for immediate response to system alerts.

Symbol Library: The internal software includes a library of symbols used to display standard mimic diagrams for pumps, valves, and power management.

Relay Outputs: Typically includes 2 relay outputs for local buzzer or lamp control.

Common Applications

Remote Alarm Panel: Placed in cabins or the mess room to alert the crew of engine or system alarms.6

Machinery Control: Used as a local control panel for specific subsystems like a steering gear or compressor.7

Bridge Watch (BWMS): Often serves as the primary setup and reset panel for the Bridge Navigational Watch Alarm System, where it monitors officer alertness.

Troubleshooting & Service Notes

Backlight Dimming: If the screen appears black but the unit has power, the backlight may be failed or dimmed to 0%.

Try pressing the brightness increase shortcut (usually a combination of the ‘Menu’ and arrow keys).

Environmental Damage: While rated for deck use, ensure the removable corner covers used for flush mounting are properly sealed to prevent water ingress behind the console.

Firmware/Configuration: The MOS-33 stores local configuration data. If you are replacing a unit, you may need to transfer the configuration or re-assign its ID on the CAN bus or Serial network for it to communicate with the main DPU

Kongsberg MP 5810 Operator Station Computer (HP RP5 Model 5810)

Kongsberg MP 5810 Operator Station, a version of the reliable HP RP5 Retail System (Model 5810), engineered by Kongsberg to withstand harsh maritime environments.

The MP 5810 functions as a process control computer, serving as the core of an operator station for systems such as dynamic positioning (DP), vessel automation, and hydrographic survey workstations.

Technical Specifications

Model: Kongsberg MP 5810 (based on HP RP5 Model 5810)

HP Product No.: E5E31EP#ABN

Function: Operator Station / Hydrographic Work Station (HWS) / Remote Controller Unit

Power Input: 100-240 VAC, 50-60 Hz

Connectivity: Dual Ethernet LAN for network redundancy, serial, PROFIBUS, CAN bus.

Applications & Compatibility

Dynamic positioning (DP), vessel automation, and hydrographic survey applications.

Use in alarm and monitoring systems and subsea survey equipment control.

Replacing a failed operator station computer in a Kongsberg marine system.

MP 5810

The Kongsberg MP 5810 is a specialized Operator Station (OS) computer based on the HP RP5 Retail System (Model 5810).1 It serves as the primary processing hub for Human-Machine Interfaces (HMI) in Kongsberg maritime automation and positioning systems.2

While its predecessor, the MP7900. was based on an office-grade chassis, the MP 5810 utilizes a “retail-hardened” chassis designed for 24/7 high-reliability operation, making it better suited for the continuous demands of a ship’s engine control room or bridge.

Technical Specifications

The MP 5810 is typically configured with industrial-grade components to ensure stability across the K-Line product family.3

Feature    Specification (Standard Kongsberg Config)

Kongsberg P/N    379524 (Commonly referenced)

HP Base Model    HP RP5 Retail System, Model 5810 (TPC-F056-SF)

Processor    Intel Core i3-4150 (3.5 GHz) or i5-4570S (Up to 3.6 GHz)

Memory    4GB or 8GB DDR3L SDRAM (Expandable to 32GB)

Storage    128GB or 256GB Solid State Drive (SSD)

Operating System    Windows 7 Professional or Windows 10 IoT Enterprise

Power Supply    240W, 90% Efficiency, Active PFC (100–240 VAC)

Connectivity & Port Layout

MP 5810

The MP 5810 is notable for its high number of serial and powered USB ports, which are essential for connecting marine peripherals like trackballs, NMEA sensors, and dedicated control panels.

Network: Dual Gigabit Ethernet ports (Intel I217LM) for redundant Net A and Net B system architectures.4

Video Out: 1x VGA and 1x DisplayPort 1.2 (supports dual independent monitors).

Serial Ports: Up to 3x RS-232 COM ports (often power-configurable to 5V/12V for specialized marine hardware).

Specialized I/O: Can be fitted with expansion cards for CAN bus or Profibus communication depending on the vessel’s specific configuration.5

System Applications

You will find the MP 5810 acting as the “brain” for the following systems:

K-Chief 600 / 700: Alarm Monitoring & Control System (AMS).

K-Pos: Dynamic Positioning OS.

K-Bridge / SIS: Hydrographic Work Stations and Navigation Integrators.6

AutoChief: Main Engine Remote Control System.

Maintenance Tips

SSD Reliability: Because these units use SSDs, they are much more resistant to ship vibration than the older MP7900 units. However, if the system becomes sluggish, check the SSD health as they have a finite write-cycle life in data-heavy automation logs.

CMOS Battery: If the computer fails to boot or loses the system time (which can desync it from the Redundant Net), the CR2032 coin cell battery on the motherboard likely needs replacement.

Dust Accumulation: Despite its “hardened” design, the oversized cooling system can pull in dust from the console. Annual internal cleaning is recommended to prevent CPU throttling.

Kongsberg ISIC MD 24″ Marine Display Monitor

Kongsberg ISIC MD 24 marine display monitors. These 24-inch displays are designed for use in demanding maritime environments, providing reliable performance and clear visuals for navigation, automation and control systems.

The Kongsberg ISIC MD 24 (and its successors like the MK2 and MK3) is a high-definition 24-inch marine display monitor manufactured by ISIC A/S (Denmark) specifically for Kongsberg Maritime systems. It is a critical component for displaying Radar, ECDIS, and K-Chief automation data on the bridge or in the engine control room.

Technical Specifications

The “MD 24” series is built to handle the rigorous vibration and electromagnetic interference (EMC) requirements of seafaring vessels.

Feature    Details

Model    ISIC MD 24 (Versions: MK1. MK2. MK3)

Kongsberg P/N    372589 (Standard) or 351780

Manufacturer P/N    05224-001 / 05224-075

Display Size    24-inch Wide (Active area approx. 521 x 293 mm)

Resolution    Full HD (1920 x 1080)

Input Voltage    100–240 VAC (Universal AC) or 24 VDC (depending on sub-model)

Mounting    Flush mount or VESA mount

Certifications    DNV, IEC 60945. IACS E10 (ECDIS compliant)

ISIC MD 24

Key Features

Dimming Capabilities: Features full-range dimming (0–100%) via front membrane keys or glass touch buttons. This is essential for maintaining night vision on the bridge.

ECDIS Compliance: The monitor is color-calibrated to meet strict international standards for Electronic Chart Display and Information Systems.

Optical Bonding (Optional): Many units feature optical bonding between the LCD and the front glass to prevent internal condensation and improve sunlight readability.

Connectivity: Typically includes standard video inputs such as DVI-I, VGA, and DisplayPort, along with serial ports (RS-232/422/485) for remote dimming control from the system software.

ISIC MD 24

Common Variants

MD 24 MK2/MK3: Updated versions with improved LED backlighting and higher contrast ratios.

DuraMON 24 G-Line: The “G-Line” version features a full glass front with capacitive touch keys, often seen in more modern integrated bridge designs.

MD-224 (Moxa variant): In some newer Kongsberg setups, you may find rebranded Moxa units which serve a similar purpose but use different internal drivers.

Maintenance Note

If you are experiencing a “No Signal” or Black Screen issue:

Check the Power Supply: If the status LED is completely off, the internal AC/DC power module may have failed (a common issue in older units).

Backlight Failure: If you can see an image faintly with a flashlight but the screen is dark, the LED driver or backlight strip is likely at fault.

Control Lock: Sometimes the front panel buttons are “locked” via the OSD (On-Screen Display) menu to prevent accidental dimming; this can be unlocked via a specific key combination (usually holding ‘Menu’ and ‘Select’).

Kongsberg MP7900 w/LAN/CAN Operator Station CPU

Description:

The Kongsberg MP7900 w/LAN/CAN is a discontinued remote workstation computer specifically designed for the Kongsberg K-Chief 500 marine automation system. The Kongsberg MP7900 is a rugged, marine-grade Operator Station CPU (Central Processing Unit) used as the primary computer for various Kongsberg Maritime systems.1 It is the “brain” of the Human-Machine Interface (HMI), processing data from sensors and translating it into the visual graphics seen on the control room monitors.

Technically, the MP7900 is often a customized version of the HP Compaq dc7900 Small Form Factor (SFF) PC, specially adapted and certified for maritime use.2

Core Applications

The MP7900 is found across almost all major Kongsberg maritime platforms:

K-Chief 600 / 700: Acts as the Operator Station (OS) for marine automation and engine monitoring.3

K-Pos Dynamic Positioning: Serves as the processing unit for DP control systems.4

Power Management Systems (PMS): Handles logic for load sharing and generator control.

K-Bridge: Used in Integrated Bridge Systems (IBS) for navigation and conning displays.5

Key Technical Specifications​

While internal hardware can vary by year of manufacture, the standard configuration for the MP7900 series typically includes:

Feature    Specification (Typical)

Model    MP7900 (often referenced as Part No: KP721AV)

Form Factor    Small Form Factor (SFF)

Base Hardware    HP Compaq dc7900 / customized for Kongsberg

Operating System    Windows Vista Business / Windows 7 (older) or Windows 10/11 (newer)

Graphics    Dual or Multi-head VGA/DVI/DisplayPort (for driving multiple bridge monitors)

Connectivity    Serial RS-232/422/485 ports, Dual Gigabit LAN (for redundant Net A/B networks)

Certification    Type approved by DNV, ABS, LR, etc.

Maintenance & Troubleshooting

Redundancy: In many K-Chief or DP setups, MP7900 units are installed in pairs. If one fails, the system should automatically switch to the standby station.

Environmental Protection: These units are designed to withstand the vibration, humidity, and temperature fluctuations of a ship’s bridge or engine control room.6

Backup/Restore: Maintenance manual 328925J (often provided with the vessel’s technical documentation) details the procedure for using a USB recovery stick to restore the system image if the hard drive fails.

Kongsberg K-Chief Control Room Panel (CRP) 603525

Part Number: 603525

Operator Panel for K-Chief Systems

Kongsberg Control Room Panel (CRP), designed for the Kongsberg K-Chief marine automation system.

It provides a robust and user-friendly interface for monitoring and controlling vessel machinery from the Engine Control Room.

The panel is ergonomically designed with functional areas for alarm handling, system commands, and data input. Built to withstand harsh marine environments, this panel is type-approved by major classification societies.

Technical Specifications

Interface: Mechanical trackball, dedicated alarm and command buttons, alphanumeric keypad.

Power: 18 to 32 VDC.

Enclosure: IP22 rated aluminum housing.

Connectivity: USB2 HID interface, protected front USB port.

Approvals: DNV, LRS, BV, GL, ABS, and others.

Applications & Compatibility

System Compatibility: Kongsberg K-Chief

Direct replacement of a faulty CRP in an Engine Control Room.

Ensuring reliable operator control of pumps, valves, and other machinery.

The Kongsberg K-Chief Control Room Panel (CRP) 603525 is a dedicated operator interface unit for the K-Chief 600 marine automation system. It is specifically designed for use in the Engine Control Room (ECR) to provide tactile control and monitoring of vessel machinery, such as pumps, valves, and compressors.

Unlike bridge-mounted panels that often feature backlighting for night operations, the 603525 CRP is optimized for well-lit environments and typically does not include background lighting.

Key Technical Specifications

The CRP is built into a robust aluminum housing and is designed for flush mounting into a control console.

Feature    Details

Part Number    603525 (Part of the COP-05 panel series)

Supply Voltage    18 to 32 VDC (24 VDC nominal)

Power Consumption    10W (nominal) / 20W (maximum)

Interfaces    Mechanical trackball (3-button), Alphanumeric keypad

Connectivity    USB 2.0 HID (protected front USB port for external devices)

I/O Channels    2 Relay outputs (DO), 4 Digital inputs (DI), 2 Analog inputs (AI)

Protection Rating    IP22

Dimensions    240 mm (W) x 192 mm (H) x 80 mm (D)

Functional Layout

The panel is divided into four distinct functional zones to streamline operator workflow:

Alarm Group: Features dedicated lamps and buttons (ACK, Sound Off) to manage and acknowledge system alerts.

Command Group: Includes the CMD CTRL button to quickly open dialogue boxes, and “1/0” buttons for immediate Start/Stop commands for machinery.

Input Group: Contains a full numeric/alphanumeric keypad and cursor control for data entry and navigation.

Mechanical Trackball: Used to position the cursor on the main Operator Station monitor, featuring three mouse buttons for selecting and activating on-screen elements.

System Role & Compatibility

Common Platform: The 603525 is part of the COP-05 hardware family, sharing internal components with the 603524 (Input Panel) and 603526 (Alarm & Control Panel).

Certification: It carries type approvals from major societies including DNV, ABS, LRS, BV, and GL, allowing it to be used in critical marine applications worldwide.

Redundancy: It communicates with the host computer (Operator Station) and remains functional even if secondary process buses fail, provided the direct USB/Serial link is intact.

Kongsberg MSI-12 Input/Output Module 339368

Part Number: 339368

Kongsberg MSI-12 module, an input/output module that is used to connect sensors and control equipment to the vessel’s central monitoring and control network.

As part of a distributed control system like the K-Chief, the MSI-12 module plays a crucial role in the reliable operation of onboard machinery.

This is an essential spare part for troubleshooting and repairing faults within the automation system.

Technical Specifications

Product: MSI-12 Input/Output Module

Associated Part Number: 339362

Function: Interfaces with field sensors and actuators for data acquisition and control.

Applications & Compatibility

339368

System Compatibility: Kongsberg Marine Automation Systems (e.g., K-Chief)

Use Case: Maintenance and repair of vessel automation systems.

Role: Manages specific segments of a ship’s machinery, such as engine monitoring, pump control, or tank level sensing.

The Kongsberg MSI-12 (339368) is a Multi-Serial Interface module, primarily used as a communication interface within Kongsberg Maritime automation systems, such as the K-Chief 600 and AutoChief series.

Its main function is to facilitate the connection between the main control system (DPU/Processors) and various peripheral devices, sensors, or actuators that communicate via serial or current loop protocols.

Technical Specifications & Details

339368

The MSI-12 acts as a bridge in marine automation networks, often converting or isolating signals for reliable data transmission in harsh maritime environments.

Feature    Details

Model Number    MSI-12

Part Number    339368 (Often associated with Revision B/B1)

Alternate P/N    8100222 (Used in different system configurations)

Function    Multi-Serial Interface / Current Loop Module

Application    K-Chief 600. Engine Control, Alarm Monitoring Systems

Origin    Norway (Kongsberg Maritime AS)

Key Characteristics

Current Loop Support: It is frequently identified as a “Current Loop Module,” making it essential for long-distance serial communication where noise immunity is critical.

System Integration: It typically mounts within a cabinet and connects to Distributed Processing Units (DPUs) like the dPSC or SCU.

Modularity: Designed for easy replacement (“hot-swappable” in some configurations) to minimize downtime during vessel maintenance.

Common Failure Points & Maintenance

In marine environments, these modules can occasionally fail due to:

Voltage Spikes: Damage to the optoisolators or serial driver ICs.

Corrosion: Salt-air exposure on the backplane connectors.

Firmware Mismatch: When replacing a module, ensure the Revision (e.g., Rev. B) matches your existing hardware, as some versions (like the MSI-CL 339369) have different pinouts or USB capabilities.

Kongsberg dPSC Dual Process Segment Controller Module 8100183

Part Number: 8100183

Kongsberg dPSC (dual Process Segment Controller) for Kongsberg’s distributed marine automation systems, such as the K-Chief 500.

The dPSC provides localized, redundant control for a specific segment of a vessel’s machinery, ensuring high reliability and rapid response for critical operations.

It handles complex data acquisition, regulation, and diagnostic tasks.

8100183

Technical Specifications

Product: dPSC – dual Process Segment Controller

Associated Part Number: 6200379

Function: Provides redundant, distributed processing and control for a machinery segment.

Communication: CANopen network.

Applications & Compatibility

System Compatibility: Kongsberg Marine Automation Systems (e.g., K-Chief 500)

Use Case: Critical control applications in dynamic positioning (DP) and power management systems.

Role: High-reliability local controller for improved system fault-tolerance.

RMP420-Remote Multipurpose

Input/Output

RPM420 is a multipurpose I/O module for use in Alarm monitoring and

Integrated Control Systems.  RMP420 is designed for 32 field input channels

in single topologies. Its interface towards the host control computer (RCU) is

provided by redundant I/O bus.

The module is approved for Ex Zone 2 applications.

Functions

• 32 software configurable multipurpose solid-state channels.

• Analog and Digital Input and Output (AI, AO, DI and DO).

• 2 or 3 wire Resistance Temperature Detector (RTD).

• 2 channels can be configured as pulse/frequency/encoder input.

• Short-circuit protected I/O loop power output.

• Dual Remote I/O process BUS interface for redundant communication with

host computer(s).

• Communication ports galvanically insulated from other module circuitry.

• Loop monitoring (per channel)

TECHNICAL DATA

RMP420

KM Article number RMP420: 306712

Electrical

Input supply voltage: 24 VDC (18-31.2 V)

Power consumption: • Power: 10 W Typical

• Loop power:

Configuration dependable

Power connectors: • Screw terminals

• Cable cross-section:

2.5 mm2

• Max. torque 0.4-0.5 Nm

RBUS interface

RBUS connectors: 2×9 pin male D-Sub,

RS485. galvanic isolated

Input/output

No. of I/O channels: 32

I/O configuration: Multipurpose. Channels

are individually

RMP420

configured

Digital Input (DI)

Loop voltage: Input supply voltage

Input loop current: Max. 4 mA @ 24 VDC loop

voltage

Channel “Off” current: <0.5 mA

Channel “On” current: >3 mA

Max input voltage: Input supply voltage

Max. input signal freq.: 10 ms pulse

Compliance: Namur compliant, PNP/NPN

compliant

Digital Output (DO)

Loop voltage: Input supply voltage

Loop driver device: Short Circuit Proof High

Side Driver

Loop driver trip current: approx. 1.4 A @ 20˚C

(reset by command)

Loop driver “Off” leakage: Max. 0.1 mA @ 24 VDC

input supply voltage

Loop monitoring current: Max. 2 mA @ 24 VDC input

supply voltage

Analog Input (AI)

Voltage input range: 0-4 V, 0-10 V

Input resistor to ground: 3 MΩ

Current input range: 0-20 mA

Automatic protection: 26 mA

Input resistor to ground: 150 Ω ±1 %

Measurement accuracy: ±0.15% of full scale

PT100 interface

Temp. range:-200 to 600˚C

Resolution: ±0.5˚C

Accuracy: ±0.4% of full scale

Temperature drift: ±50 ppm/˚C

Max. wire resistance: 25 ohm/wire

Response time 1000 ms

Analaog Output (AO)

Voltage output range: 0-10 V ±0.5% (internal

resistance: 1 kohm)

Current output range: 0-20 mA

Minimumlocal resistance: 500 ohm

Measurement accuracy: ±0.35% of full scale

Pulse/Frequency interface

Max. input range: Pulse count freq.:10 kHz

Encoder count Up/Down:

2.5 kHz rev. (4 counts/

revolution)

Duty cycle: Pulse width: min. 11µ @

10 kHz range

Pulse lever transmission: Namur: 1on >2.1 mA, 1off

<1.2 mA. Rin <2.2 kohm,

1max = 3 mA,

Current: 1ohm >9 mA, 1off <7 mA,

Rin <1 kohm, 1max = 13 mA

Accuracy (oscillator): 100 ppm over the whole

temp. range (-15 to

+70˚C) 25 ppm typical @

2˚C

Fail safe

HW Fail safe: Min. 65 ms

Internal Test Error: Instantly set

Soft Fail safe (down

counter):

100 ms – 65 sec. (6 sec.

default)

Compliance • IACS E10

• IEC 60945

• IEC 60355

• IEC/EN60079-0.-7

Type approval Presafe 18ATEX12094X

(II 3G Ex ec IIC T4 Gc)

Environmental specifications

Ambient temp. and humidity:

Temp. operation:-15˚C to +70˚C

Temp. storage:-25˚C to +70˚C

Humidity operation: Up to 98% RH

Humidity storage: Up to 98% RH

Protection standards: IP 20 (IEC 60529)

Mechanical

HxWxD: 355x158x87 mm

Weight: 1.35 kg

DIN rail vertical

mounted: 35 7.5/15

Life cycle prediction

Predicted failure rate @

GB 25˚C (60% confident,

based on chip suppliers

data): 38.5 years

Predicted failure rate @

NS 35˚C (Environmental

derating based on Rome

Laboratory toolkit): 10.4 years