ZR22G, ZR402G разделенный анализатор оксида магния и кислорода / влажности

Introduction

Thank you for purchasing the ZR22G, ZR402G Separate type Zirconia Oxygen/Humidity Analyzer. Please read the following respective documents before installing and using the ZR22G, ZR402G Separate type Zirconia Oxygen/Humidity Analyzer

An exclusive User’s Manual might be attached to the products whose suffix codes or option codes contain the code “Z” (made to customers’ specifications). Please read it along with this manual. The EXAxt ZR Separate type Zirconia Oxygen/Humidity Analyzer is usually the Oxygen Analyzer which connected ZR402G converter and ZR22G detector together, but it is to the High Temperature Humidity Analyzer when the option code “/HS (Set for Humidity Analyzer)” of ZR402G is selected.After that, in this manaul, the Humidity Analyzer refers to the thing which ZR22G combined with ZR402G with “/HS”.In addition, in this manual, the Oxygen Analyzer is mainly listed. When there are not mentions

such as “in the case of Humidity Analyzer”, it becomes same as the Oxygen Analyzer.The EXAxt ZR Separate type Zirconia Oxygen/Humidity Analyzer has been developed for combustion control in various industrial processes. This analyzer basically consists of a detector and a converter. You can select between several versions, based upon your application. Optional accessories are also available to improve measurement accuracy and automate calibration. An optimal control system can be realized by adding appropriate options. This instruction manual refers to almost all of the equipment related to the EXAxt ZR. You may skip any section(s) on the equipment which is not included in your system. Regarding the HART communication protocol, refer to IM 11M12A01-51E. IM 11M12A01-51E has been published as “Model EXAxt ZR Series HART Protocol” . The Integrated type (with sensor and analyzer integrated in one body) is described in  IM 11M12A01-04E.

For the safe use of this equipment

WARNING

Handle it with care. Be sure not to accidentally drop it. Handle safely to avoid injury. Connect the power supply cord only after confirming that the supply voltage matches the rating of this equipment. In addition, confirm that the power is switched off when connecting power supply. Some sample gas is dangerous to people. When removing this equipment from the process line for maintenance or other reasons, protect yourself from potential poisoning by using a protective mask or ventilating the area well.

CAUTION

The cell (sensor) at the tip of the detector is made of ceramic (zirconia element). Do not drop the detector or subject it to pressure stress.

• Do NOT allow the sensor (probe tip) to make contact with anything when installing the detector.

• Avoid any water dropping directly on the probe (sensor) of the detector when installing it.

• Check the calibration gas piping before introducing the calibration gas to ensure that there is no leakage of the gas. If there is any leakage of the gas, the moisture drawn from the sample gas may damage the sensor.

• The detector (especially at the tip) becomes very hot. Be sure to handle it with gloves.

NOTICE

l Specification check When the instrument arrives, unpack the package with care and check that the instrument has not been damaged during transportation. In addition, please check that the specification matches the order, and required accessories are not missing. Specifications can be checked by the model codes on the nameplate. Refer to Chapter 2 Specifications for the list of model codes. l Details on operation parameters When the EXAxt ZR Separate type Oxygen Analyzer arrives at the user site, it will operate based on the operation parameters (initial data) set before shipping from the factory. Ensure that the initial data is suitable for the operation conditions before conducting analysis. Where necessary, set the instrument parameters for appropriate operation. For details of setting data, refer to chapters 7 to 10. When user changes the operation parameter, it is recommended to note down the changed setting data.

Safety Precautions

Safety, Protection, and Modification of the Product

• In order to protect the system controlled by the product and the product itself and ensure safe operation, observe the safety precautions described in this user’s manual. We assume no liability for safety if users fail to observe these instructions when operating the product.

• If this instrument is used in a manner not specified in this user’s manual, the protection provided by this instrument may be impaired.

• If any protection or safety circuit is required for the system controlled by the product or for the product itself, prepare it separately.

• Be sure to use the spare parts approved by Yokogawa Electric Corporation (hereafter simply referred to as YOKOGAWA) when replacing parts or consumables.

• Modification of the product is strictly prohibited.

• The following safety symbols are used on the product as well as in this manual.

WARNING

This symbol indicates that an operator must follow the instructions laid out in this manual in order to avoid the risks, for the human body, of injury, electric shock, or fatalities. The manual describes what special care the operator must take to avoid such risks.

CAUTION

This symbol indicates that the operator must refer to the instructions in this manual in order to prevent the instrument (hardware) or software from being damaged, or a system failure from occurring.

Warning and Disclaimer

The product is provided on an as is basis. YOKOGAWA shall have neither liability nor responsibility to any person or entity with respect to any direct or indirect loss or damage arising from using the product or any defect of the product that YOKOGAWA can not predict in advance.

Notes on Handling User’s Manuals

• Please hand over the user’s manuals to your end users so that they can keep the user’s manuals on hand for convenient reference.

• Please read the information thoroughly before using the product.

• The purpose of these user’s manuals is not to warrant that the product is well suited to any particular purpose but rather to describe the functional details of the product.

• No part of the user’s manuals may be transferred or reproduced without prior written consent from YOKOGAWA.

• YOKOGAWA reserves the right to make improvements in the user’s manuals and product at any time, without notice or obligation.

• If you have any questions, or you find mistakes or omissions in the user’s manuals, please contact our sales representative or your local distributor.

Drawing Conventions

Some drawings may be partially emphasized, simplified, or omitted, for the convenience of description. Some screen images depicted in the user’s manual may have different display positions or character types (e.g., the upper / lower case). Also note that some of the images contained in this user’s manual are display examples. In the figure listed in this manual, the example of the oxygen analyzer is shown mainly. In the case of the humidity analyzer, unit indication may be different. Please read it appropriately.

Product Disposal:

The instrument should be disposed of in accordance with local and national legislation/regulations.

Trademark Acknowledgments

• All other company and product names mentioned in this user’s manual are trademarks or registered trademarks of their respective companies.

• We do not use TM or  mark to indicate those trademarks or registered trademarks in this user’s manual.

Authorized Representative in the EEA and the Importer into the EU/ EEA Market The Authorized Representative for this product in the EEA and the importer for this product into the EU/EEA market via Yokogawa sale channel is: Yokogawa Europe B.V. Euroweg 2, 3825 HD Amersfoort, The Netherlands n Importer for This Product into the Great Britain Market (ZR22G only) In relation to UKCA marking, the importer for this product into the Great Britain market via the YOKOGAWA sales channel is : Yokogawa United Kingdom Limited Stuart Road Manor Park Runcorn, WA7 1TR, United Kingdom n Identification Tag This manual and the identification tag attached on packing box are essential parts of the product. Keep them together in a safe place for future reference. n Users This product is designed to be used by a person with specialized knowledge. n How to dispose Batteries and Waste batteries: (Only valid in the EU for EU Battery Directive/Regulation and in the UK for UK Battery Regulation) Batteries are included in this product. This marking indicates they shall be sorted out and collected as ordained in the EU battery Directive/Regulation and UK battery Regulation. When you need to replace batteries, contact your local Yokogawa office in the EEA and/or UK respectively.

Battery type : Manganese dioxide lithium battery Notice:  The symbol (see above) means they shall be sorted out and collected as ordained in the EU Battery Directive. n Information of the WEEE Directive This product is purposely designed to be used in a large scale fixed installations only and, therefore, is out of scope of the WEEE Directive. The WEEE Directive does not apply. This product should be disposed in accordance with local and national legislation/regulations. The WEEE Directive is only valid in the EU and UK.